Difference between revisions of "ADAS Camera Manual"

From Wiki Knowledge Base | Teltonika GPS
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
__TOC__
 
__TOC__
−
== Main (front) camera unit preparation ==
 
−
The main unit comes prepared for bus/large truck setup (cable routing) or vehicles with mostly vertical windshields''.'' To set up the unit for an average truck or passenger vehicle, dismantle partially as shown below:
 
−
{| class="wikitable"
 
−
|+
 
−
! colspan="6" |Unit preparation
 
−
|-
 
−
|[[File:Camera1.jpg|center|frameless|181x181px]]
 
−
|1.  Remove cover
 
−
|[[File:Camera1.jpg|center|frameless|186x186px]]
 
−
|2. Remove (2x) screws,
 
−
remove plastic cover
 
−
|[[File:Camera3.png|center|frameless|216x216px]]
 
−
|3. Remove (2x) screws,
 
−
pry plastic mounting
 
  
−
frame off Unit from corners
+
== Product Specification ==
−
|-
+
<table class="nd-othertables" style="width: 68%;">
−
|[[File:Camera4.png|center|frameless|199x199px]]
+
        <th style="width: 10%; text-align:left; vertical-align:middle; color:black">Technical data</th>
−
|4. Reroute the main
+
        <th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
−
cable (and rear camera
+
    </tr>
−
 
+
<tr>
−
cable, if adding) around unit
+
        <td style="width: 8%; text-align:left;">Supported by</td>
−
 
+
        <td style="width: 8%; text-align:left">FMB640, FMC640, FMB125, FMC125, FMB225, FMC225</td>
−
to front (glass side)
+
    </tr>
−
|[[File:Camera5.png|center|frameless|221x221px]]
+
<tr>
−
|5. Press tightly into
+
        <td style="width: 8%; text-align:left">Camera Resolution</td>
−
channels when routing cables.
+
        <td style="width: 8%; text-align:left">1280 x 720 (HD)</td>
−
 
+
    </tr>
−
Remove front camera dust sticker
+
<tr>
−
|[[File:Camera6.png|center|frameless|238x238px]]
+
        <td style="width: 8%; text-align:left">View angle</td>
−
|6. Replace 1 cover only
+
        <td style="width: 8%; text-align:left">30 (V), 52 (H), 60 (D)</td>
−
removed from step 3.
+
    </tr>
−
 
+
<tr>
−
Replace 2 screws.
+
        <td style="width: 8%; text-align:left">Size</td>
−
 
+
        <td style="width: 8%; text-align:left">80 x 120 x 50 mm</td>
−
Leave the remaining
+
    </tr>
−
 
+
<tr>
−
covers off until the last step
+
        <td style="width: 8%; text-align:left">SD card</td>
−
|}
+
        <td style="width: 8%; text-align:left">Max. 128GB</td>
−
 
+
    </tr>
−
==ADAS Calibration==
+
<tr>
−
ADAS Calibration requires:
+
        <td style="width: 8%; text-align:left">Video encoding</td>
−
 
+
        <td style="width: 8%; text-align:left">H264</td>
−
*a laptop with an internet connection and a browser
+
    </tr>
−
 
+
<tr>
−
*micro-USB cable
+
<table class="nd-othertables" style="width: 68%;">
−
 
+
        <th style="width: 10%; text-align:left; vertical-align:middle; color:black">Electrical parameters</th>
−
*tape measure
+
        <th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
−
 
+
    </tr>
−
*parking the car with a clear, open stretch of about a 45 meters unobstructed view (try to park close to your facility to keep the internet connection accessible – at least during the calibration driver installation)
+
<tr>
−
*a partner to drive the vehicle while speed correction is performed
+
          <td style="width: 8%; text-align:left;">Input voltage range</td>
−
 
+
          <td style="width: 8%; text-align:left">9 – 36 V</td>
−
Before beginning, insert the provided micro-SD card into the main unit in the location shown below until it clicks and turn the Ignition ON. Wait for the prompt, then press and release the center button one time. After the successful prompt and the unit reboots, continue to step 1.
+
    </tr>
−
[[File:Vehinst12.png|center|frameless|335x335px]]
+
<tr>
−
 
+
          <td style="width: 8%; text-align:left">Temperature</td>
−
1. Park the vehicle in a spot with a clear stretch of unobstructed line-of-sight (about 45 meters). Leave the vehicle running
+
          <td style="width: 8%; text-align:left">-20 °C to +70 °C (operation)
−
2. Connect the USB cable to the Mirco-USB port on the side of the main unit (windshield) and the other end to the laptop. If on a windows 10 machine, it should automatically install the required driver. If not or on an older machine, go to movon.co.kr, go to the ‘ADAS’ tab at the top then to ‘Downloads’ under Support. Download the appropriate zip file (contains driver) and extract it fully for your version of Windows OS (if using the 7/8 driver, install the .exe file). If WIN10, once downloaded, disconnect/reconnect the USB and it should automatically install, or find the unit in Device Manager and right-click, Update Driver and browse for driver locally.[[File:Vehinst13.png|center|frameless|335x335px]]
+
-40 °C to +85 °C (storage)</td>
−
3. Open Chrome browser again and type in ''’10.0.0.1’'' into the URL bar''.'' If the driver was installed properly, the calibration screen will appear. Input credentials and press ''LOGIN''  USER:     ''admin''  PASS:     ''1234''<br>
+
    </tr>
−
4. '''Select Vehicle Signal Type:''' there are several wiring options for installation: CAN-BUS / Analog (GPIO) / GPS (Speed). Select the proper calibration option based off which was installed: CAN (if CAN file is available), Analog (if analog signals were tapped)
+
<tr>
−
 
+
          <td style="width: 8%; text-align:left">Relative Humidity</td>
−
'''''Vehicle Data File''''' (CAN-BUS)For CAN-BUS connection, choose the ‘Vehicle info file’ tab and select ‘Choose File’ to upload the previously downloaded ‘mdasinfo.dat’ file (see ‘CAN-Equipped vehicles’ section).
+
          <td style="width: 8%; text-align:left">Max. 90 %</td>
−
[[File:Vehinst14.jpg|center|frameless|363x363px]]
+
    </tr>
−
 
+
<tr>
−
==Camera location and Vehicle Measurement==
+
          <td style="width: 8%; text-align:left">Power consumption</td>
−
Camera location and vehicle measurement can affect ADAS performance. It`s very important put accurate data for the best performance.
+
          <td style="width: 8%; text-align:left">12V max @300mA
−
[[File:Vehinst15.png|center|frameless|404x404px|alt=]]
+
12V Idle state @ 3mA</td>
 +
    </tr>
 +
<tr><br>
 
<table class="nd-othertables" style="width: 68%;">
 
<table class="nd-othertables" style="width: 68%;">
−
           <th style="width: 10%; text-align:left; vertical-align:middle; color:black">Camera Option</th>
+
           <th style="width: 10%; text-align:left; vertical-align:middle; color:black">Interface</th>
 
           <th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
 
           <th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>
 
     </tr>
 
     </tr>
 
<tr>
 
<tr>
−
           <td style="width: 8%; text-align:left;">Camera Height</td>
+
           <td style="width: 8%; text-align:left;">USB</td>
−
           <td style="width: 8%; text-align:left">Distance from  ground to the center of camera lens.</td>
+
           <td style="width: 8%; text-align:left">USB 2.0 (for calibration)</td>
 
     </tr>
 
     </tr>
 
<tr>
 
<tr>
−
           <td style="width: 8%; text-align:left">Camera Center</td>
+
           <td style="width: 8%; text-align:left">CAN</td>
−
           <td style="width: 8%; text-align:left">Distance from the  center of windshield to camera lens
+
           <td style="width: 8%; text-align:left">CAN 2.0 (Car signal – Left/Right, Speed, RPM, Brake)</td>
−
“-“: Left Side / “+”:Right Side
+
    </tr>
−
 
+
<tr><br>
−
(If ADAS is  attached 5cm to the right from the center, input 5.
+
          <td style="width: 8%; text-align:left">RS232</td>
−
 
+
          <td style="width: 8%; text-align:left">Indicator TX/RC (for communication with FM device)</td>
−
If ADAS is  attached 5cm to the left from the center, input -5.)  
 
−
</td>
 
 
     </tr>
 
     </tr>
−
<tr>
+
</table>
−
          <td style="width: 8%; text-align:left">Camera to Wheel</td>
 
−
          <td style="width: 8%; text-align:left">Distance from the  camera to the center of the wheel.
 
−
'''For trucks or  buses''', some vehicles’  wheels are located behind.
 
−
 
 
−
In this case,  please input 20cm.
 
−
</td>
 
−
    </tr><tr><td>Vehicle Width</td><td>Distance between  the wheels.
 
−
Measure distance  from left outside boarder to right outside boarder of the wheels.
 
−
</td></tr><tr><td>Camera to bumper</td><td>Distance from the  camera lens to the end of the bumper.
 
−
For trucks or  buses, it is recommended to input 300 if sensitive FCW warning is needed.
 
−
</td></tr></table>
 
−
 
 
−
Camera angle – adjust the camera angle to locate the horizontal between the red guide lines.
 
−
[[File:Vehinst16.png|center|frameless|316x316px]]
 
−
In case of indoor installation or somewhere you cannot see the horizon properly, use same data to "'''Camera Height'''”. Mark the same height on the wall apart about 3 ~ 5 meters from the vehicle.
 
−
[[File:Vehinst17.png|center|frameless|332x332px]]
 
−
 
 
−
Fine Camera Angle - For better accuracy of ADAS, locate the yellow dotted line in the horizon as close as possible.
 
−
[[File:Vehinst18.png|center|frameless|344x344px]]
 
−
 
 
−
Hood Line - Locate the red line at the end of the vehicle’s hood line to remove the useless area.
 
−
[[File:Vehinst19.png|center|frameless|360x360px]]
 
−
Please follow link for video instruction: https://www.youtube.com/watch?v=93wrc6j9aqA
 
−
 
 
−
==ADAS configuration==
 
−
{| class="wikitable"
 
−
| colspan="2" |'''You can adjust  the LDW Sensitivity for your convenience'''
 
−
|-
 
−
|
 
−
* Enable LDW function. (On  / Off)
 
−
 
 
−
* Set the Activation Speed  (15, 30, 45, 60, 75km/h).
 
−
* Set the sensitivity of  LDW warning on a scale of 1 to 5.
 
−
* As the level gets higher,  it gets more sensitive.
 
−
* Enable Repeat LDW (On /  Off)
 
−
* If it’s on, ADAS keeps  warning until the driver secures the lane.
 
−
* Warning sound: Select  preferred warning sound for LDW.
 
−
|[[File:Mdconfi1.png|center|frameless]]
 
−
 
 
−
|-
 
−
| colspan="2" |'''You can adjust the FCW Sensitivity for your  convenience:'''
 
−
|-
 
−
|
 
−
* Enable FCW function. (On  / Off)
 
−
* Set the sensitivity of  FCW warning on a scale of 1 to 5.
 
−
(As the level  gets higher, it gets more sensitive)
 
−
* Enable Repeat FCW (On /  Off).
 
−
(If it’s on, ADAS keeps warning until the driver secures safe distance)
 
−
* Enable Sync with Brake  (On / Off).
 
−
(If it’s on, ADAS won’t give FCW warning if the brake pedal was used)
 
−
* Warning sound: Select  preferred warning sound for FCW
 
−
|[[File:Mdconf2.png|center|frameless|301x301px]]
 
−
|-
 
−
| colspan="2" |'''Safety distance alert setup:'''
 
−
|-
 
−
|
 
−
* Enable SDA function. (On  / Off)
 
−
* Set the sensitivity of  SDA on a scale of 1 to 5.
 
−
* As the level  gets higher, it gets more sensitive.
 
−
* Repeat SDA and SDA  re-alert can be changed. (On / Off)
 
−
 
 
−
- Repeat SDA:  If it’s on, ADAS keeps warning until the driver secures safe distance.
 
−
 
 
−
''- Re-alert  SDA: If it’s on, ADAS gives warnings every time''
 
−
 
 
−
''the same front vehicle gets  closer than safe distance.''
 
−
|[[File:Mdconfi3.png|center|frameless]]
 
−
|-
 
−
| colspan="2" |'''Pedestrian collision warning setup:'''
 
−
|-
 
−
|
 
−
* Enable PCW function. (On  / Off)
 
−
 
 
−
* Warning sound: Select  preferred warning sound for PCW.
 
−
|[[File:Mdconfi4.png|center|frameless]]
 
−
|-
 
−
| colspan="2" |'''Advanced ADAS setup:'''
 
−
|-
 
−
|
 
−
* Enable Forward Proximity  Warning function. (On / Off)
 
−
* Set the warning range on  a scale of 1 to 3.
 
−
(As the level  gets higher, it gets more sensitive)
 
−
* Enable Front vehicle  start alarm. (On / Off)
 
−
* Enable Speed Limit  Recognition. (On / Off)
 
−
* Set the warning  sensitivity (0, 5, 10, 15, 20%).
 
−
Ex) If you  set 10% then you will get alarm
 
  
−
when your speed over the limit more than 10%, 
+
== ADAS and FMC640 Features ==
 +
[[File:MicrosoftTeams-image (12).png|left|frameless|52x52px]]
 +
'''Periodic photo sending'''
  
−
100km limit -> Warning start from 110km speed.
+
Possible to receive periodical photo from ADAS
−
* Enable voice guidance (On  / Off).
 
−
|[[File:Mdconfi5.1.png|center|frameless]]
 
−
|-
 
−
| colspan="2" |'''Fleet management setup'''
 
−
|-
 
−
|
 
−
* Set  Speed limit warning (Off, 80, 90, 100, 110, 120, 130, 140km/h).
 
  
−
- You  can set your own speed limit for your fleet.  
+
[[File:MicrosoftTeams-image (13).png|left|frameless|52x52px]]
  
−
- You can set speed limit of your vehicle and  get warning if you over the speed limit.
+
'''Video/photo by request'''
  
−
* Enable  Transmit data RS-232 feature
+
You can request video/photo from ADAS
−
(Converter mode should be selected to work with  FMx125).
 
  
−
It allows ADAS event data transmission to integrated device.
+
== ADAS Features ==
−
* Set Lock  volume button control on a scale of 1 to 5 and Off.  
+
[[File:PEDESTRIAN COLLISION WARNING.png|left|frameless|52x52px]]
−
You can fix the volume level and prevent the driver from adjusting the
+
'''PCW''' '''(PEDESTRIAN COLLISION WARNING)'''
  
−
settings using indicator.
+
Notifies driver of any pedestrians, bicycles or motorcycles ahead.
−
* Set Break  time alarm on a scale of 1 to 6 hours and Off.  
+
[[File:LANE DEPARTURE WARNING.png|left|frameless|52x52px]]
 +
'''LDW (LANE DEPARTURE WARNING)'''
  
−
* Enable  Vibration setting for LDW, FCW, PCW (On / Off / Both).
+
Helps to regain direction if the driver unintentionally departs lanes.
−
You can check the connection with the button.
+
[[File:FORWARD COLLISION WARNING.png|left|frameless|52x52px]]
−
|[[File:Mdconfi6.1.png|center|frameless]]
+
'''FCW (FORWARD COLLISION WARNING)'''
−
|-
+
[[File:FORWARD PROXIMITY WARNING.png|left|frameless|52x52px]]
−
| colspan="2" |'''Miscellaneous  Settings:'''
+
Sends warning alerts if a crash is imminent to assist driver in maintaining a safe traveling distance.
−
|-
 
−
|
 
−
* Speed Unit on Analog  video output (km/h or MPH).
 
  
−
* Set Video out format  (NTSC / PAL).
+
'''FPW (FORWARD PROXIMITY WARNING)'''
  
−
* Set Voice guide language
+
Notifies driver if the vehicle moves forward while another vehicle is in the detection range, which can be setup at 1 m, 2 m, 3 meters.
−
(English /  Korean / Chinese / Spanish / Japanese / Hebrew/ No Sound).
+
[[File:FRONT VEHICLE START ALARM.png|left|frameless|52x52px]]
−
* Enable Indicator buzzer  (On / Off).
+
'''FVSA (FRONT VEHICLE START ALARM)'''
  
−
* Speed Display on  Indicator could be ON/Off
+
Notifies driver if the front vehicle started moving forward from 0 speed without the vehicle moving within 2 secs.
−
|[[File:Mdconfi7.png|center|frameless]]
+
[[File:SAFETYDISTANCEALERT.png|left|frameless|52x52px]]
−
|-
+
'''SDA (SAFETY DISTANCE ALERT)'''
−
| colspan="2" |'''ADAS Setup Complete'''
 
−
|-
 
−
|
 
−
* Click “Complete” button  to finish Calibration setup. Then ADAS will be
 
−
rebooted automatically.
 
−
* Click “Export vehicle  profile” button, if you want to download vehicleprofile.dat.
 
  
−
This vehicleprofile contains all the calibration  settings you’ve set.  
+
Attracts the driver's attention to keep the safe distance ahead by warning the driver (active from 30km/h).
 +
[[File:DIGITAL VIDEO RECORDER.png|left|frameless|52x52px]]
 +
'''DVR (DIGITAL VIDEO RECORDER)'''
  
−
With this file, you can simply apply current settings to  another vehicle.
+
Records scenes as HD+HD resolutions into SD card before and after an accident. (Every minute in a loop)
−
|[[File:Mdconfi8.png|frameless|alt=|center|351x351px]]
+
[[File:SPEED LIMIT RECOGNITION.png|left|frameless|52x52px]]
−
|}
+
'''SLR (SPEED LIMIT RECOGNITION)'''
  
 +
Recognizes speed limit signs and provides warnings for over speed (Available with ADAS Plus).
  
 
==ADAS data transferring timing==
 
==ADAS data transferring timing==
 +
'''Test was performed using Baudrate 460800'''
 
{| class="wikitable"
 
{| class="wikitable"
 
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image resolution'''
 
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Image resolution'''
Line 243: Line 133:
 
|-
 
|-
 
|style="text-align: center;|640x480
 
|style="text-align: center;|640x480
−
|style="text-align: center;|30
+
|style="text-align: center;|0
 
|<nowiki>-</nowiki>
 
|<nowiki>-</nowiki>
−
|style="text-align: center;|~24kB
+
|style="text-align: center;|~10kB
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|72s / 100s
+
|style="text-align: center;|48s / 70s
 
|style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x4801.jpg|thumb]]
 
|style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:640x4801.jpg|thumb]]
 
|-
 
|-
 
|style="text-align: center;|1280x720
 
|style="text-align: center;|1280x720
−
|style="text-align: center;|30
+
|style="text-align: center;|0
 
|<nowiki>-</nowiki>
 
|<nowiki>-</nowiki>
−
|style="text-align: center;|~160kB
+
|style="text-align: center;|~28kB
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|180s / 230s
+
|style="text-align: center;|67s / 103s
 
|style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x7201.jpg|thumb]]
 
|style="text-align: center; style=" width: 150px; background: white; color: black;" |[[File:1280x7201.jpg|thumb]]
 
|-
 
|-
Line 261: Line 151:
 
|-
 
|-
 
|style="text-align: center;|640x480
 
|style="text-align: center;|640x480
 +
|style="text-align: center;| 0
 +
|style="text-align: center;|10s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|5s
+
|style="text-align: center;|~144kB
 +
|style="text-align: center;|86s / 198s
 +
|
 +
|-
 +
|style="text-align: center;|640x480
 +
|style="text-align: center;| 25
 +
|style="text-align: center;|10s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|~588kB
+
|style="text-align: center;|~140kB
−
|style="text-align: center;|75s / 110s
+
|style="text-align: center;|58s / 144s
 
|
 
|
 
|-
 
|-
 
|style="text-align: center;|640x480
 
|style="text-align: center;|640x480
 +
|style="text-align: center;| 50
 +
|style="text-align: center;|10s
 +
|style="text-align: center;| -
 +
|style="text-align: center;|~139kB
 +
|style="text-align: center;|48s / 110s
 +
|
 +
|-
 +
|style="text-align: center;|640x480
 +
|style="text-align: center;| 0
 +
|style="text-align: center;|20s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|10s
+
|style="text-align: center;|~285 kb
 +
|style="text-align: center;|183s / 400s
 +
|
 +
|-
 +
|style="text-align: center;|640x480
 +
|style="text-align: center;| 25
 +
|style="text-align: center;|20s
 +
|style="text-align: center;| -
 +
|style="text-align: center;|~201 kb
 +
|style="text-align: center;|155s / 349s
 +
|
 +
|-
 +
|style="text-align: center;|640x480
 +
|style="text-align: center;| 50
 +
|style="text-align: center;|20s
 +
|style="text-align: center;| -
 +
|style="text-align: center;|~150 kb
 +
|style="text-align: center;|145s / 400s
 +
|
 +
|-
 +
|style="text-align: center;|640x480
 +
|style="text-align: center;| 0
 +
|style="text-align: center;|30s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|~1MB
+
|style="text-align: center;|~439 kb
−
|style="text-align: center;|201s / 290s
+
|style="text-align: center;|201s / 501s
 
|
 
|
 
|-
 
|-
 
|style="text-align: center;|640x480
 
|style="text-align: center;|640x480
 +
|style="text-align: center;| 25
 +
|style="text-align: center;|30s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|15s
+
|style="text-align: center;|~390 kb
 +
|style="text-align: center;|185s / 3558s
 +
|
 +
|-
 +
|style="text-align: center;|640x480
 +
|style="text-align: center;| 50
 +
|style="text-align: center;|30s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|~1.5MB
+
|style="text-align: center;|~239 kb
−
|style="text-align: center;|220s / 310s
+
|style="text-align: center;|180s / 550s
 
|
 
|
 
|-
 
|-
 
|style="text-align: center;|1280x720
 
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 0
 +
|style="text-align: center;|10s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|5s
+
|style="text-align: center;|~286KB
 +
|style="text-align: center;|90s / 261s
 +
|-
 +
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 25
 +
|style="text-align: center;|10s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|~875KB
+
|style="text-align: center;|~260KB
−
|style="text-align: center;|221s / 310s
+
|style="text-align: center;|78s / 215s
 
|style="text-align: center;|[[File:481012 Adas apkirptas 2.mp4]]
 
|style="text-align: center;|[[File:481012 Adas apkirptas 2.mp4]]
 +
|
 +
|-
 +
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 50
 +
|style="text-align: center;|10s
 +
|style="text-align: center;| -
 +
|style="text-align: center;|~235KB
 +
|style="text-align: center;|70s / 211s
 +
|
 
|-
 
|-
 
|style="text-align: center;|1280x720
 
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 0
 +
|style="text-align: center;|20s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|10s
+
|style="text-align: center;|~590 kb
 +
|style="text-align: center;|120s / 502s
 +
|
 +
|-
 +
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 25
 +
|style="text-align: center;|20s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|~1.64MB
+
|style="text-align: center;|~494KB
−
|style="text-align: center;|309s / 410s
+
|style="text-align: center;|111s / 430s
 
|
 
|
 
|-
 
|-
 
|style="text-align: center;|1280x720
 
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 50
 +
|style="text-align: center;|20s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|15s
+
|style="text-align: center;|~460KB
 +
|style="text-align: center;|100s / 297s
 +
|
 +
|-
 +
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 0
 +
|style="text-align: center;|30s
 
|style="text-align: center;| -
 
|style="text-align: center;| -
−
|style="text-align: center;|~2.52MB
+
|style="text-align: center;|~1MB
−
|style="text-align: center;|450s / 600s
+
|style="text-align: center;|241s / 710s
 
|
 
|
 
|-
 
|-
 +
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 25
 +
|style="text-align: center;|30s
 +
|style="text-align: center;| -
 +
|style="text-align: center;|~720KB
 +
|style="text-align: center;|163s / 540s
 +
|
 +
|-
 +
|style="text-align: center;|1280x720
 +
|style="text-align: center;| 50
 +
|style="text-align: center;|30s
 +
|style="text-align: center;| -
 +
|style="text-align: center;|~695KB
 +
|style="text-align: center;|160s / 512s
 +
|
 
|}
 
|}
 
'''* NOTE:''' This approximate time which we receive during testing in real cases can be different.
 
'''* NOTE:''' This approximate time which we receive during testing in real cases can be different.
  
 
'''* NOTE''' Image compression is a type of data compression applied to digital images, to reduce their cost for storage or transmission. Algorithms may take advantage of visual perception and the statistical properties of image data to provide superior results compared with generic data compression methods which are used for other digital data.
 
'''* NOTE''' Image compression is a type of data compression applied to digital images, to reduce their cost for storage or transmission. Algorithms may take advantage of visual perception and the statistical properties of image data to provide superior results compared with generic data compression methods which are used for other digital data.
 +
[[Category: Teltonika ADAS]]

Latest revision as of 10:03, 2 December 2022

Main Page > Video Solutions > Teltonika ADAS > ADAS Camera Manual

Product Specification

Technical data Description
Supported by FMB640, FMC640, FMB125, FMC125, FMB225, FMC225
Camera Resolution 1280 x 720 (HD)
View angle 30 (V), 52 (H), 60 (D)
Size 80 x 120 x 50 mm
SD card Max. 128GB
Video encoding H264

Electrical parameters Description
Input voltage range 9 – 36 V
Temperature -20 °C to +70 °C (operation) -40 °C to +85 °C (storage)
Relative Humidity Max. 90 %
Power consumption 12V max @300mA 12V Idle state @ 3mA

Interface Description
USB USB 2.0 (for calibration)
CAN CAN 2.0 (Car signal – Left/Right, Speed, RPM, Brake)
RS232 Indicator TX/RC (for communication with FM device)

ADAS and FMC640 Features

MicrosoftTeams-image (12).png

Periodic photo sending

Possible to receive periodical photo from ADAS

MicrosoftTeams-image (13).png

Video/photo by request

You can request video/photo from ADAS

ADAS Features

PEDESTRIAN COLLISION WARNING.png

PCW (PEDESTRIAN COLLISION WARNING)

Notifies driver of any pedestrians, bicycles or motorcycles ahead.

LANE DEPARTURE WARNING.png

LDW (LANE DEPARTURE WARNING)

Helps to regain direction if the driver unintentionally departs lanes.

FORWARD COLLISION WARNING.png

FCW (FORWARD COLLISION WARNING)

FORWARD PROXIMITY WARNING.png

Sends warning alerts if a crash is imminent to assist driver in maintaining a safe traveling distance.

FPW (FORWARD PROXIMITY WARNING)

Notifies driver if the vehicle moves forward while another vehicle is in the detection range, which can be setup at 1 m, 2 m, 3 meters.

FRONT VEHICLE START ALARM.png

FVSA (FRONT VEHICLE START ALARM)

Notifies driver if the front vehicle started moving forward from 0 speed without the vehicle moving within 2 secs.

SAFETYDISTANCEALERT.png

SDA (SAFETY DISTANCE ALERT)

Attracts the driver's attention to keep the safe distance ahead by warning the driver (active from 30km/h).

DIGITAL VIDEO RECORDER.png

DVR (DIGITAL VIDEO RECORDER)

Records scenes as HD+HD resolutions into SD card before and after an accident. (Every minute in a loop)

SPEED LIMIT RECOGNITION.png

SLR (SPEED LIMIT RECOGNITION)

Recognizes speed limit signs and provides warnings for over speed (Available with ADAS Plus).

ADAS data transferring timing

Test was performed using Baudrate 460800

Image resolution Image compression (%) Video duration (s) Size of image Size of video

FMC640 4G / FMB640 2G

Time interval (s) from trigger to files received on server FMC640 4G / FMB640 2G Photo example
Image
640x480 0 - ~10kB - 48s / 70s
640x4801.jpg
1280x720 0 - ~28kB - 67s / 103s
1280x7201.jpg
Video
640x480 0 10s - ~144kB 86s / 198s
640x480 25 10s - ~140kB 58s / 144s
640x480 50 10s - ~139kB 48s / 110s
640x480 0 20s - ~285 kb 183s / 400s
640x480 25 20s - ~201 kb 155s / 349s
640x480 50 20s - ~150 kb 145s / 400s
640x480 0 30s - ~439 kb 201s / 501s
640x480 25 30s - ~390 kb 185s / 3558s
640x480 50 30s - ~239 kb 180s / 550s
1280x720 0 10s - ~286KB 90s / 261s
1280x720 25 10s - ~260KB 78s / 215s
1280x720 50 10s - ~235KB 70s / 211s
1280x720 0 20s - ~590 kb 120s / 502s
1280x720 25 20s - ~494KB 111s / 430s
1280x720 50 20s - ~460KB 100s / 297s
1280x720 0 30s - ~1MB 241s / 710s
1280x720 25 30s - ~720KB 163s / 540s
1280x720 50 30s - ~695KB 160s / 512s

* NOTE: This approximate time which we receive during testing in real cases can be different.

* NOTE Image compression is a type of data compression applied to digital images, to reduce their cost for storage or transmission. Algorithms may take advantage of visual perception and the statistical properties of image data to provide superior results compared with generic data compression methods which are used for other digital data.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=ADAS_Camera_Manual&oldid=78235"