Indicator Display Icons

From Wiki Knowledge Base | Teltonika GPS
Main Page > Video Solutions > Teltonika ADAS > Indicator Display Icons

Indicator Display

Indicator Display for ADAS
Lts.jpg
Left Turn Signal

The left under bar blinks when the left turn signal is active at 0km/h.

Right Turn Signal

The right under bar blinks when the right turn signal is active at 0km/h.

Ldwact.jpg
LDW Active

LDW is enabled.

LDW Unavailable

LDW is not active.

Leftdepaler.jpg
Left Departure Alert

When the vehicle departs the left lane.

Right Departure Alert

When the vehicle departs the right lane.

Frontvehdet.jpg
Front Vehicle Detection

When the vehicle ahead is in the host vehicle’s lane.

Forwcolwar.jpg
Forward Collision Warning

Indicates impending collision with the vehicle ahead

Pedcolwar.jpg
Pedestrian Collision Warning

Indicates impending collision with a pedestrian.

Peddet.jpg
Pedestrian Detection

Displayed when a pedestrian is detected ahead.

Recnovoic.jpg
Recording without voice

DVR function is working and voice is not being recorded.

Recwvoice.jpg
Recording with voice

DVR function is working and voice is being recorded.

Camconnerr.jpg
Camera Connection Error

Camera connection is not good. Contact your local distributor/installer.

Canconnerr.jpg
CAN Communication Error

CAN Communication has a problem. Contact your local distributor/installer.

Camviewblockerr.jpg
Camera View Block Error

The camera is covered by something. Remove something blocking camera vision.

Lowvisindic.jpg
Low Visibility Indication

The performance of ADAS might be limited under the inclement weather condition.

Indicator Display for ADAS Plus
Booting mode.jpg
Booting Mode

ADAS is turning on.

Driving mode.jpg
Driving Mode

Default mode when ADAS is turned on.

Left turn signall.jpg
Left Turn Signal

The left under bar blinks when the left turn signal is active at 0km/h.

Right turn signalc.jpg
Right Turn Signal

The right under bar blinks when the right turn signal is active at 0km/h.

Ldw available-.jpg
LDW Active

LDW is enabled.

Ldw unavailable.jpg
LDW Unavailable

LDW is not active.

Left lane departure alert.jpg
Left Departure Alert

When the vehicle departs the left lane.

Right lane departure alert.jpg
Right Departure Alert

When the vehicle departs the right lane.

Front vehicle detection.jpg
Front Vehicle Detection

When the vehicle ahead is in the host vehicle’s lane.

Forward collision warning.jpg
Forward Collision Warning

Indicates impending collision with the vehicle ahead

Pedestrian Collision Warning

Indicates impending collision with a pedestrian.

Pedestrian Detection

Displayed when a pedestrian is detected ahead.

Forward Proximity Warning

Front vehicle is within the range of FPW warning settings

Forward Collision Warning icon

Collision with front vehicle is impending.

Pedestrian Collision Warning icon

Collision with pedestrian is impending.

Speed Limit Detection icon

Speed limit sign is detected

Camera Connection Error

Camera connection is not good. Contact your local distributor/installer.

CAN Communication Error

CAN Communication has a problem. Contact your local distributor/installer.

Camera View Block Error

The camera is covered by something. Remove something blocking camera vision.

Low Visibility Indication

The performance of ADAS might be limited under the inclement weather condition.

Indicator communication error
SD card error

The SD card cannot be read. Please check if it is inserted or is not corrupted.

Indicator Settings

Display Turning On: Press the center button.

Display Turning Off: Press the center button until the display turns off. (Even if the display turns off, it gives a warning sound)

Indicator Settings for ADAS
1) Working Mode


When it turns on, working mode operates.

Volume control is available, when indicator is in

the working mode.



Press the (-) button repeatedly to decrease

the volume, press the (+) button repeatedly to

increase the volume.

2) Brightness Control Mode


Press the center button once it changes to

brightness control mode.


Press the (-) and (+) button to decrease or

increase the brightness level and save the new settings.

The brightness level appears

in numbers.


Press the center button again, it goes to

left LDW sensitivity control mode. If there

is no button operation for 5 seconds, it

returns to working mode.       

     

There are five available levels(1-5).

3) Left LDW Sensitivity Control Mode


Press the center button once it changes

to left LDW sensitivity control mode.

Press the (-) and (+) button to decrease or

increase the left LDW sensitivity and save

the new settings.

The left LDW sensitivity level appears in numbers.

Press the center button again, it goes to

Right LDW sensitivity control mode.

 

If there is no button operation for 5 seconds,

it returns to working mode.


There are five available  levels(1-5).

4) Right LDW Sensitivity Control Mode


Press the center button once it changes to

Right LDW sensitivity control mode. 

Press

the (-) and (+) button to decrease or

increase the right LDW sensitivity and save

the new settings.

The right LDW sensitivity level appears in

numbers.

Press the center button again, it goes to

FCW sensitivity control mode.

If there is

no button operation for 5 seconds, it

returns to working mode.    

               

There are five available levels(1-5).

5) FCW Sensitivity Control Mode


Press the center button once it changes

to FCW sensitivity control mode.


Press the (-) and (+) button to decrease

or increase the FCW sensitivity and save

the new settings.

The FCW sensitivity level appears in

numbers.

Press the center button again, it goes to

SDA sensitivity control mode.

If there is no button operation for 5

seconds, it returns to working mode.


There are five available levels(1-5).

6) SDA Sensitivity Control Mode


Press the center button once it

changes to SDA sensitivity control mode.


Press the (-) and (+) button to decrease

or increase the SDA sensitivity and save

the new settings.


The SDA sensitivity level

appears in numbers.


Press the center button again, it goes to

FPW sensitivity control mode.

If there is no button operation for 5 seconds,

it returns to working mode.      

               

There are five available levels(1-5).

7) FPW Sensitivity Control Mode


Press the center button once it changes

to FPW sensitivity control  mode.


Press the (-) and (+) button to decrease

or increase the FPW sensitivity and save

the new settings.

The FPW sensitivity level appears in

numbers.

Press the center button again, it goes

to Volume control mode.

If there is no button operation for 5

seconds, it returns to working mode.


There are three available levels(1-3).

8) Volume Control Mode


Press the center button once it

changes to volume control mode.


Press the (-) and (+) button to decrease

or increase the volume and save the

new settings.


The volume level appears in numbers.


Press the center button again, it goes

to working mode.


If there is no button operation  for 5 seconds,

it returns to working mode.


There are five available levels(1-5).

Indicator Settings for ADAS plus
1) Working Mode


When it turns on, working mode operates.

Volume control is available, when indicator is in

the working mode.



Press the (-) button repeatedly to decrease

the volume, press the (+) button repeatedly

to increase the volume.

2) Brightness Control Mode


Press the center button once it changes to

brightness control mode.


Press the (-) and (+) button to decrease or

increase the brightness level and save the new settings.

The brightness level appears

in numbers.


Press the center button again, it goes to

left LDW sensitivity control mode. If there

is no button operation for 5 seconds, it

returns to working mode.       

     

There are five available levels(1-5).

3) Left LDW Sensitivity Control Mode


Press the center button once it changes

to left LDW sensitivity control mode.

Press the (-) and (+) button to decrease or

increase the left LDW sensitivity and save

the new settings.

The left LDW sensitivity level appears in numbers.

Press the center button again, it goes to

Right LDW sensitivity control mode.

 

If there is no button operation for 5 seconds,

it returns to working mode.


There are five available  levels(1-5).

4) Right LDW Sensitivity Control Mode


Press the center button once it changes to

Right LDW sensitivity control mode. 

Press

the (-) and (+) button to decrease or

increase the right LDW sensitivity and save

the new settings.

The right LDW sensitivity level appears in

numbers.

Press the center button again, it goes to

FCW sensitivity control mode.

If there is

no button operation for 5 seconds, it

returns to working mode.    

               

There are five available levels(1-5).

5) FCW Sensitivity Control Mode


Press the center button once it changes

to FCW sensitivity control mode.


Press the (-) and (+) button to decrease

or increase the FCW sensitivity and save

the new settings.

The FCW sensitivity level appears in

numbers.

Press the center button again, it goes to

SDA sensitivity control mode.

If there is no button operation for 5

seconds, it returns to working mode.


There are five available levels(1-5).

6) SDA Sensitivity Control Mode


Press the center button once it

changes to SDA sensitivity control mode.


Press the (-) and (+) button to decrease

or increase the SDA sensitivity and save

the new settings.


The SDA sensitivity level

appears in numbers.


Press the center button again, it goes to

FPW sensitivity control mode.

If there is no button operation for 5 seconds,

it returns to working mode.      

               

There are five available levels(1-5).

7) FPW Sensitivity Control Mode


Press the center button once it changes

to FPW sensitivity control  mode.


Press the (-) and (+) button to decrease

or increase the FPW sensitivity and save

the new settings.

The FPW sensitivity level appears in

numbers.

Press the center button again, it goes

to Volume control mode.

If there is no button operation for 5

seconds, it returns to working mode.


There are three available levels(1-3).

8) Volume Control Mode


Press the center button once it

changes to volume control mode.


Press the (-) and (+) button to decrease

or increase the volume and save the

new settings.


The volume level appears in numbers.


Press the center button again, it goes

to working mode.


If there is no button operation  for 5 seconds,

it returns to working mode.


There are five available levels(1-5).

9) Voice Recording Control Mode


Press the (-) button for 3 seconds,

then it enters voice recording control

mode.


Two options (On/Off) are available.

Press the (-) and (+) button to select

each option and the center button to

save new settings.


If there is no button operation for

5 seconds, it returns to driving mode.

10) SLR Sensitivity Control Mode


Press the center button once, then it

changes to SLR sensitivity control mode.


Five levels (0, 5, 10, 15, 20) are available.

Press the (-) and (+) button to decrease

or increase the SLR sensitivity and save

new settings.


Press the center button again, then it

goes to volume control mode.


If there is no button operation for

5 seconds, it returns to driving mode.