Difference between revisions of "First Start"
MindaugasK (talk | contribs) |
|||
(9 intermediate revisions by 3 users not shown) | |||
Line 4: | Line 4: | ||
When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos. | When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos. | ||
− | ''' | + | '''NOTE:''' If you do not insert microSD cards, you will be only available to receive images, but you do not receive video if the trigger will happen or you will send SMS/GPRS command. |
[[image:Dual_camera_MicroSD_card_insert_1.png|400px]] | [[image:Dual_camera_MicroSD_card_insert_1.png|400px]] | ||
Line 37: | Line 37: | ||
==Installation== | ==Installation== | ||
+ | |||
+ | === Direct connection to power supply (testing) === | ||
To connect the DualCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly. | To connect the DualCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly. | ||
Line 44: | Line 46: | ||
[[File:443035 Teltonika DualCam Wiki Knowledge Base Teltonika GPS 1.2.jpg|frameless|928x928px]] | [[File:443035 Teltonika DualCam Wiki Knowledge Base Teltonika GPS 1.2.jpg|frameless|928x928px]] | ||
− | + | === Connection of Dualcam to vehicle via DOUT1 === | |
+ | Connection to vehicle can be achived by connecting the Dualcam's ground cable to the DOUT1 of the FMx125 device. This will in turn control the state of Dualcam and give the user control of it by enabling or disabling it using 'setdigout 1' commands or by connecting a button to it. More about the configuration of this scenario can be read in the [[DualCam Configuration#Camera control using DOUT1|Dualcam Configuration]] page. | ||
+ | [[File:DOUT1 CONTROL.jpg|left|frameless|1000x1000px]] | ||
+ | |||
+ | |||
+ | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
{| class="wikitable" | {| class="wikitable" | ||
|+ | |+ | ||
+ | Dualcam camera output description | ||
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |PIN NUMBER | ! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |PIN NUMBER | ||
! style="width:15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |PIN NAME | ! style="width:15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |PIN NAME |
Revision as of 10:54, 9 January 2023
Main Page > Video Solutions > Teltonika DualCam > First StartHow to insert SD card
Teltonika DualCam can hold 2 x microSD cards, which are inserted on both sides of the camera (front and rear).
When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos.
NOTE: If you do not insert microSD cards, you will be only available to receive images, but you do not receive video if the trigger will happen or you will send SMS/GPRS command.
Mounting recommendation
Camera location:
- Camera must be mounted as shown in the picture below, you can stick it to window using 3M duct tape, or you can use screws fit to other surfaces.
- To maximize the field of view, the camera should be mounted in the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded. We recommend you mount the Dual Cam near the rearview mirror area.
- We always recommend angling the lens slightly upwards so that video footage displays about 60% road and 40% sky. This angle offers a good balance of exposure and details.
- View footage from SD card while mounting the Dual Cam so you can select what position and angle you prefer the Dual Cam to be set at.
Rear camera adjusting:
- Gently remove the cover from the case of the top camera. After the cover is removed you will see the screw.
- Unscrew it and rotate the rear camera to adjust the better view of the cabin. The rear camera contains infrareds on it.
- Put the cover back on the camera.
Connecting power source:
- Due to high camera power consumption we always recommend connecting the camera to the vehicle ignition. The camera start-up in 2-3 seconds when vehicle ignition goes ON.
- Camera ground (Black cable) must be connected to the same (common) Ground wire as FMx125 device.
- Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.
Please refer to FMx125 device mounting recommendation: https://wiki.teltonika-gps.com/view/FMC125_First_Start#Mounting_recommendations
Installation
Direct connection to power supply (testing)
To connect the DualCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly.
NOTE: Dual Cam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.
Connection of Dualcam to vehicle via DOUT1
Connection to vehicle can be achived by connecting the Dualcam's ground cable to the DOUT1 of the FMx125 device. This will in turn control the state of Dualcam and give the user control of it by enabling or disabling it using 'setdigout 1' commands or by connecting a button to it. More about the configuration of this scenario can be read in the Dualcam Configuration page.
PIN NUMBER | PIN NAME |
DESCRIPTION |
---|---|---|
1 | RS232-Tx | DualCam output for data transmission through RS232 |
2 | RS232-Rx | DualCam input for data reception through RS232 |
3 | VCC(9-36V) (+) | Power supply for the DualCam |
4 | GND (-) | Ground |