0
edits
Changes
no edit summary
'''NOTE: FMX640 device also needs SD Card to be inserted.'''
'''NOTE: FMX640 device also needs SD Card to be inserted.'''
Using the above information in regards to connection, please follow the below steps:
# Insert Micro SD Card into the DSM camera main block.
# Connect DSM camera to the main block
# Connect main block with power and ground wires either to the vehicles relay (see picture above) or power supply.
# The RX and TX cables from the main block have to be connected through the RJ-45 cable to the FMX640 device.
# Connect FMX640 device with PWR and Ground to power supply or vehicle's relay (see picture above).
# Connect DOUT (1,2,3,4) to relay in order to control immobilizer and DSM camera state.
# Continue in configurator in order to set up the DSM camera [[here]].
[[Category:DSM]]
[[Category:DSM]]
