Template:SMS/GPRS Commands

Commands apply for these devices: | TMT250 | GH5200 | TST100 | TFT100 | TAT100 |

All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.
If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.

SMS command structure:

<SMS login><space><SMS password><space><command><space><value>

SMS command getinfo example:

• If you have set SMS login and password: login pass getinfo
• If SMS login and password are not set leave two spaces before command:   getinfo

GPRS commands require Codec 12 protocol.

To search for compatible products, Expand all content

Common commands

---

Command	Description	Response	HW Support	Parameter Group
getinfo	Device runtime system information.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getver	Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getstatus	Modem Status information.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getgps	Current GPS data, date and time.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getio	Readout analog input,digital input and output.	Yes	[Expand] TST100 TFT100	Common commands
ggps	Returns location information with Google maps link.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
readio #	Returns IO status, # AVL ID.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
cpureset	resets device	No	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
fwstats	Get data about FW and restarts	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getrecord	SMS command initiates saving and sending of high priority record	No	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getimeiccid #	Response is sent to SMS/GPRS command sender and also to GSM number provided. 1.# GSM number using international format e.g. 37069012345	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getimsi	Sends the IMSI number of the SIM card inserted as a response to the sender.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
allver	Responds with information about hardware and firmware versions and storage space	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getparam #	Returns selected parameter value. 1.# - first Parameter ID value. 2.# - second Parameter ID value. 3.# - third Parameter ID value. SMS command is limited to 160 characters.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
getparam #;#;…
setparam #:#	Sets selected parameter value [Parameter ID] : [New Parameter Value] ; [Parameter ID] : [New Parameter Value]... SMS command is limited to 160 characters.	Yes	[Expand] TMT250 GH5200 TST100 TFT100 TAT100	Common commands
setparam #:#;#:#;…
flush #,#,#,#,#,#,#	Redirects device to other server. 1.# - IMEI. 2.# - APN. 3.# - LOGIN. 4.# - PASS. 5.# - IP. 6.# - PORT. 7.# - MODE (0-TCP/1-UDP).	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
countrecs	Returns records number.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
web_connect	Connect to Fota WEB immediately.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
deleterecords	Delete all records from SD card.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
pulsedigout ## X1 Y1 X2 Y2 X3 Y3	Set digital output. 1.# - 0, 1 or ? (0 - OFF, 1 - ON, ? - Ignore) starting state for DOUT1. 2.# - 0, 1 or ? (0 - OFF, 1 - ON, ? - Ignore) starting state for DOUT2. X1 - ON timeout for DOUT1 in milliseconds Y1 - ON timeout for DOUT2 in milliseconds X2 - OFF timeout for DOUT1 in milliseconds Y2 - OFF timeout for DOUT2 in milliseconds X3 - repeats for DOUT1 Y3 - repeats for DOUT2	Yes	[Expand] TFT100 TST100	Common commands
setdigout ## Y1 Y2 Z1 Z2	Set digital output. 1.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1. 2.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). Z1 – maximum speed value for DOUT1 if needed. Z2 – maximum speed value for DOUT2 if needed.	Yes	TFT100	Common commands
battery	Returns battery state info.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
wdlog	Returns all information about 'watch dogs'	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
defaultcfg	Load default configuration.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
setkey # #	Add new or change current configuration keyword. If device is locked, keyword cannot be changed. 1.# - old keyword (if adding new keyword space). 2.# - new keyword.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
delkey #	Remove existing keyword (If device is locked, keyword cannot be changed). 1.# - old keyword.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
bbread #	Return black box information (HEX value of event ID and HEX value of custom data field (optional)). 1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
bbinfo #	Return same information as bbread command but additional all events timestamp is written in HEX. 1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
sdformat	Format SD card	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Common commands
shutdown	SMS/GPRS command, used to shutdown device. Device should respond with “Shutdown has been initiated” an turn off in 15 s after receiving command.	Yes	[Expand] TMT250 GH5200	Common commands

Bluetooth Commands

---

Command	Description	Response	HW Support	Parameter Group
btgetlist #	Returns requested Bluetooth list. # - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected, 3 – Discovered BT4/BLE devices).	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Bluetooth commands
btscan	Starts Bluetooth scan.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Bluetooth commands
btvisible #	Sets Bluetooth to visible with TMO. # - visibility TMO (from 1 to 255 seconds).	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Bluetooth commands
btrelease #	Disconnects from current device and pauses auto connect functionality for TMO. # - none or TMO (from 1 to 255 seconds).	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Bluetooth commands
btunpair #	Unpair Bluetooth device. # - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address).	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Bluetooth commands
btlock_unlock	Unlock Bluetooth lock	Yes	TST100	Bluetooth commands
btlock_changepw: # #	Change Bluetooth lock's password: btlock_changepw:<Current password> <New password>	Yes	TST100	Bluetooth commands

Commands Related to Features

---

Command	Description	Response	HW Support	Parameter Group
towingreac	Towing reactivation.	Yes	TFT100	Commands related to features
auto_calibrate:set	Returns the state of calibration.	Yes	[Expand] TST100 TFT100	Commands related to features
odoset:#	Set total odometer value. # - new odometer value in km.	Yes	[Expand] TST100 TFT100	Commands related to features
odoget	Display current odometer value.	Yes	[Expand] TST100 TFT100	Commands related to features
on_demand_tracking#	Tracking on Demand functionality. # = Value ↓ 0 – Stops Tracking on Demand functionality. 1 – Starts Tracking on Demand functionality. 2 – Generates one high priority record and inititates data sending to server. Note: This command is supported from 55.00.00 firmware version.	Yes	[Expand] TMT250 GH5200 TST100 TFT100	Commands related to features

CAN Commands

---

Command	Description	Response	HW Support	Parameter Group
askoll_unlock#	Immobilizer. Used to lock/unlock the vehicle. # = Value ↓ 1 - Lock 0 - Unlock	Yes	TFT100	Askoll protocol CAN Commands
askoll_horn	Sounds the horn of the vehicle. Used to identify the vehicle in the street.	Yes	TFT100	Askoll protocol CAN Commands
askoll_tc	Top case opening. Used to open the vehicle's luggage compartment.	Yes	TFT100	Askoll protocol CAN Commands
govecs_lock	Used to lock Govecs Schwalbe & FLEX e-scooters.	Yes	TFT100	Bosch/FLEX protocol CAN Commands
!govecs_lock	Used to lock Govecs Schwalbe & FLEX e-scooters and send high priority record.	Yes	TFT100	Bosch/FLEX protocol CAN Commands
govecs_unlock	Used to unlock Govecs Schwalbe & FLEX e-scooters	Yes	TFT100	Bosch/FLEX protocol CAN Commands
!govecs_unlock	Used to unlock Govecs Schwalbe & FLEX e-scooters and send high priority record.	Yes	TFT100	Bosch/FLEX protocol CAN Commands
govecs_openbox:#	Used to open/close Govecs Schwalbe & FLEX e-scooters case. # - 1 - open case; # - 0 - close case.	Yes	TFT100	Bosch/FLEX protocol CAN Commands
!setdigout:## Y1 Y2 Z1 Z2	Used to set digital output and send high priority record. 1.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1. 2.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). Z1 – maximum speed value for DOUT1 if needed. Z2 – maximum speed value for DOUT2 if needed.	Yes	TFT100	Bosch/FLEX protocol CAN Commands
govecs_open	Used to unlock the seat lock.	Yes	TFT100	FLEX protocol CAN Commands
!govecs_open	Used to unlock the seat lock and send high priority record.	Yes	TFT100	FLEX protocol CAN Commands
govecs_close	Used to lock the seat lock.	Yes	TFT100	FLEX protocol CAN Commands
!govecs_close	Used to lock the seat lock and send high priority record.	Yes	TFT100	FLEX protocol CAN Commands
govecs_horn	Used to activate scooter’s horn for X seconds.	Yes	TFT100	FLEX protocol CAN Commands
!govecs_horn	Used to activate scooter’s horn for X seconds and send high priority record.	Yes	TFT100	FLEX protocol CAN Commands
govecs_hazard	Used to activate scooter’s hazard lights for X seconds.	Yes	TFT100	FLEX protocol CAN Commands
!govecs_hazard	Used to activate scooter’s hazard lights for X seconds and send high priority record.	Yes	TFT100	FLEX protocol CAN Commands
govecs_hazardon	Used to activate scooter’s hazard lights.	Yes	TFT100	FLEX protocol CAN Commands
!govecs_hazardon	Used to activate scooter’s hazard lights and send high priority record.	Yes	TFT100	FLEX protocol CAN Commands
govecs_hazardoff	Used to deactivate scooter’s hazard lights.	Yes	TFT100	FLEX protocol CAN Commands
!govecs_hazardoff	Used to deactivate scooter’s hazard lights and send high priority record.	Yes	TFT100	FLEX protocol CAN Commands
govecs_drivetrain	Used to request drive train state. Value 0 - OFF, value 1 - passive, value 2 - actuators active, value 3 - fully active, value 4 - immobilizer alarm.	Yes	TFT100	FLEX protocol CAN Commands
emco_unlock:<firmware ID>	Used to unlock EMCO e-scooter using firmware ID.	Yes	TFT100	Manual CAN protocol CAN Commands
emco_lock	Used to lock EMCO e-scooter.	Yes	TFT100	Manual CAN protocol CAN Commands
emco_open:#	Used to open/close seat of EMCO e-scooter. # - 1 - open seat; # - 0 - close seat.	Yes	TFT100	Manual CAN protocol CAN Commands
mcan_cmd:<Command No.>	Used to trigger Manual CAN Command.	Yes	TFT100	Manual CAN protocol CAN Commands
mcan_stop:<Command No.>	Used to turn OFF periodic Manual CAN Command.	Yes	TFT100	Manual CAN protocol CAN Commands

RS485 Super Soco commands

Command	Description	Response	HW Support	Parameter Group
supersoco_lock	Used to lock the vehicle.	Yes	TFT100	Super Soco protocol Commands
supersoco_unlock	Used to unlock the vehicle.	Yes	TFT100	Super Soco protocol Commands
supersoco_poweron	Used to power on the vehicle.	Yes	TFT100	Super Soco protocol Commands
supersoco_openseat	Used to open the vehicle seat.	Yes	TFT100	Super Soco protocol Commands
supersoco_geterr	Used to request vehicle error codes.	Yes	TFT100	Super Soco protocol Commands
supersoco_getfwver	Used to request vehicle firmware version.	Yes	TFT100	Super Soco protocol Commands

E-Scooter Commands

---

Command	Description	Response	HW Support	Supported by
sclockctrl #	Used to lock/unlock E-Scooter. # = Value ↓ 0 - Unlock 1 - Lock	Yes	TST100	Xiaomi M365 Segway ES/MAX FitRider
scsetunits #	Used to change units. # = Value ↓ 0 - Kilometers (km) 1 - Miles (mi)	Yes	TST100	FitRider
scrstcnt #	Resets internal E-Scooter counters. # = Value ↓ 1 - single time 2 - total mileage 3 - total	Yes	TST100	FitRider
scsetledswitch #	This option disallows headlight control by scledctrl command, if LED switch is set to 1 (scledswitch 1) # = Value ↓ 0 - disable 1 - enable	Yes	TST100	FitRider
scledctrl	Turns ON/OFF LED but only if -> scsetledswitch 1, # = Value ↓ 0 - Turn OFF 1 - Turn ON For OKAI scooters values are: 0 - Turn off 1 - Blink 2 - Turn on	Yes	TST100	FitRider/Okai
scsetbtcode ######	Sets BT pairing code. ###### - 6 digits BT pairing code	Yes	TST100	Segway ES/MAX/Xiaomi M365
scsetspdlim <arg1> <arg2>	Sets E-Scooter's Speed limit. <arg1> - Mode <arg2> - Speed limit	Yes	TST100	Segway ES/MAX/FitRider/ Hergele/Okai
scsetmode #	Sets E-Scooter's operating mode. # = Value ↓ 0 - NORMAL 1 - ECO 2 - SPORT	Yes	TST100	Segway ES/MAX/ Hergele
scenginectrl #	Start or shut down the engine. # = Value ↓ 0 - Turn OFF the engine 1 - Turn ON the engine	Yes	TST100	Segway ES/MAX
screbootsys	Restart E-Scooter's system. Restart is available only in non-riding mode. Corresponding mark will be reset after completion of the operation.	Yes	TST100	Segway ES/MAX
scpoweroff	Shut down E-Scooter.	Yes	TST100	Segway ES/MAX
scsetcruiseswitch #	Cruise control switch. # = Value ↓ 0 - OFF 1 - ON	Yes	TST100	Segway ES/MAX
sclookfor #	Enable looking for scooter functionality. Initiates headlight and taillight flash + buzzer beep. # = Value ↓ 0 - OFF 1 - ON	Yes	TST100	Segway ES/MAX
scsetledswitch #	Headlight control. # = Value ↓ 0 - OFF 1 - ON	Yes	TST100	Segway ES/MAX/ FitRider/Hergele
scsetbeepswitch #	Beep control switch. # = Value ↓ 0 - OFF 1 - ON	Yes	TST100	Segway ES/MAX
scbuzzerctrl <arg1> <arg2>	IoT buzzer control. <arg1> - 0 - OFF; 1 - ON <arg2> - timeout (sec)	Yes	TST100	Segway ES/MAX/Xiaomi M365
scgetbtcode	Returns BT pairing code	Yes	TST100	Segway ES/MAX/Xiaomi M365
scgetspdlim #	Returns Speed limit value for chosen operating mode. # = Value 0 - NORMAL mode 1 - ECO mode 2 - SPORT mode	Yes	TST100	Segway ES/MAX
scgetmode	Returns operating mode.	Yes	TST100	Segway ES/MAX
scgetcruiseswitch	Returns cruise control switch state.	Yes	TST100	Segway ES/MAX
scgetconfig	Returns E-Scooter's functions setup.	Yes	TST100	Segway ES/MAX
scgetledswitch	Returns headlight control switch state.	Yes	TST100	Segway ES/MAX
scsetalarmswitch <arg>	Beep control on alarm. <arg> - 0 - OFF; 1 - ON	Yes	TST100	Segway ES/MAX
scgetalarmswitch	Returns alarm control switch state.	Yes	TST100	Segway ES/MAX
scgetbeepswitch	Returns beep control switch state.	Yes	TST100	Segway ES/MAX
scsetconfig <arg1> <arg2>	E-Scooter's functions setup. <arg1> - 0 - 1st instruction set; 1 - 2nd instruction set <arg2> - 2 bytes value where each bit controls separate parameter	Yes	TST100	Segway ES/MAX
sciap <arg>	E-Scooter's firmware update force command. <arg> - 0 – Master control, 1 – BMS1 (internal battery), 2 - BMS2 (external battery), 3 - Instrument panel (scooter head), 4 – Cable Lock (Wired)	Yes	TST100	Segway ES/MAX
scbatopen	Opens battery lock for battery replacement	Yes	TST100	Segway MAX
sccableunlock	Unlock cable lock	Yes	TST100	Segway MAX (with Wired lock)