Changes

== Overspeeding ==

== Overspeeding ==

[[File:Overspeedinggif2.gif|alt=|right|374x374px]]

[[File:Overspeedinggif2.gif|alt=|right|374x374px]]

When vehicle speed exceeds the configured maximum speed value, the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than the configured max speed -3% of the configured max speed.  

When the vehicle speed exceeds the configured maximum speed value, the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop the overspeeding event, the detected speed has to be lower than the configured max speed -3% of the configured max speed.  

Configurable parameters:

Configurable parameters:

<br />

<br />

*Priority – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high.

*'''Priority''' – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high.

*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeds the configured value, then the event will occur.

*'''Max speed (km/h)''' – the maximum allowed speed that can be reached. If the speed exceeds the configured value, then the event will be generated.

==Trip==

==Trip==

[[File:Tripgif.gif|alt=|right]]

[[File:Tripgif.gif|alt=|right]]

''Trip''' section offers user to configure the ''Trip'' feature. ''Trip'' starts when Ignition according ''Ignition source'' is ON and Movement according ''Movement source'' is ON and also 'Start Speed' is exceeded. ''Start Speed'' defines the minimum GPS speed in order to detect ''Trip'' start.<br />''Ignition OFF Timeout'' is the timeout value to detect ''Trip'' end once the Ignition (configured ignition source) is off.<br />I/O Trip Odometer must be enabled to use ''Distance counting mode'' feature. When it is set to <span style="color:#F6A83E">Continuous</span>, ''Trip'' distance is going to be counted continuously (from ''Trip'' start to ''Trip'' end) and written to I/O ''Trip Odometer'' value field. When ''Trip'' is over and the next ''Trip'' begins, ''Trip Odometer'' value is reset to zero.<br />When ''Mode'' is set to <span style="color:#F6A83E">Between Records</span>, the distance is going to be counted between every record made. This value is written to I/O ''Trip Odometer'' value field and is reset to zero every new record until the ''Trip'' ends. If later all Odometer values are summed up manually, the distance driven during the whole duration of the ''Trip'' can be obtained.<br />

''Trip'' section offers user to configure the ''Trip'' feature. ''Trip'' starts when Ignition according ''Ignition source'' is ON and Movement according ''Movement source'' is ON and also 'Start Speed' is exceeded. ''Start Speed'' defines the minimum GPS speed in order to detect ''Trip'' start.<br />''Ignition OFF Timeout'' is the timeout value to detect ''Trip'' end once the Ignition (configured ignition source) is off.<br />I/O Trip Odometer must be enabled to use ''Distance counting mode'' feature. When it is set to <span style="color:#F6A83E">Continuous</span>, ''Trip'' distance is going to be counted continuously (from ''Trip'' start to ''Trip'' end) and written to I/O ''Trip Odometer'' value field. When ''Trip'' is over and the next ''Trip'' begins, ''Trip Odometer'' value is reset to zero.<br />When ''Mode'' is set to <span style="color:#F6A83E">Between Records</span>, the distance is going to be counted between every record made. This value is written to I/O ''Trip Odometer'' value field and is reset to zero every new record until the ''Trip'' ends. If later all Odometer values are summed up manually, the distance driven during the whole duration of the ''Trip'' can be obtained.<br />

== Odometer==

== Odometer==

[[File:FTC odometer.png|alt=|right|500px]]

[[File:FTC odometer.png|alt=|right|500px]]

Set odometer value from which the device will start counting.''Odometer Value'' sets the starting total odometer value. ''Priority'' allow to select how events are being sent to a server.

Set odometer value from which the device will start counting.''Odometer Value'' sets the starting total odometer value. ''Priority'' allow to select how events are being sent to a server.

'''Priority'''

'''Priority'''

*'''Disable''' - disable scenario.

*'''Disable''' - disable scenario.

*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.

*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.

*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.

*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.

<br>

<br>

<br>

<br>

==Unplug detection==

==Unplug detection==

[[File:Unplug2.gif|alt=|right]]

[[File:Unplug latest.png|right|500 px]]

An event will be generated when is unplugged from {{{txt_src|external power}}} or plugged back in again.  

An event will be generated when is unplugged from {{{txt_src|external power}}} or plugged back in again.  

'''Priority'''

'''Priority'''

*'''Disable''' - disable scenario.

*'''Disable''' - disable scenario.

If the Static navigation filter is disabled, it will apply no changes to GPS data. If the Static navigation filter is enabled, it will filter changes in GPS position if no movement (configured movement source) or ignition (configured ignition source) is detected (depends on what static navigation settings are selected: movement, ignition or both sources). It allows filtering GPS jumps when an object is parked (is not moving) and GPS position is still traced.<br><br>

If the Static navigation filter is disabled, it will apply no changes to GPS data. If the Static navigation filter is enabled, it will filter changes in GPS position if no movement (configured movement source) or ignition (configured ignition source) is detected (depends on what static navigation settings are selected: movement, ignition or both sources). It allows filtering GPS jumps when an object is parked (is not moving) and GPS position is still traced.<br><br>

<br />

<br />

==Digital output overcurrent recovery==

==Digital output overcurrent recovery==