Changes

The password must fulfil several requirements:

The password must fulfil several requirements:

1.A password must contain between 5 to 10 characters;

# A password must contain between 5 to 10 characters;

 

# Symbols are not allowed (for example: "." "/" "@" "@" "!");

2.Symbols are not allowed (for example: "." "/" "@" "@" "!");

# Passwords must match;

 

3.Passwords must match;

After each of the conditions is fulfilled, the corresponding field will be marked with a green tick. Press button "Set" to set password for the configuration.

After each of the conditions is fulfilled, the corresponding field will be marked with a green tick. Press button "Set" to set password for the configuration.

Recovery password parameters are the same as [[Configuration password#How to set configuration password with TCT|configuration password]].  

Recovery password parameters are the same as [[Configuration password#How to set configuration password with TCT|configuration password]].  

After installing the Recovery password, don't forget to save it to your device.

After setting the Recovery password, don't forget to save it to your device.

The Recovery password can also be changed or disabled at will.

The Recovery password can also be changed or disabled whenever you want following "Change" or "Disable" steps in TCT.

== How to connect to the devices with password ==

== How to connect to the devices with password ==

[[File:Wrong password was entered.png|thumb|Wrong password was entered]]

[[File:Enter primary password.png|thumb]]

After clicking on the "Configure" button, a window will appear in which it is necessary to enter the password set for configuration and press the "Enter" button.

After clicking on the "Configure" button, a window will appear in which it is necessary to enter the configuration password set for configuration and press the "Enter" button.

 

If an incorrect password is entered, the TCT will inform you with the text "Wrong password". It will also show the number of remaining attempts. The total number of attempts is 5. After they are exhausted, the device will be blocked.

== Disable password ==

== Disable password ==

To disable the password, open the "System" tab, then "Configuration password" and click the "Disable password" button. Enter the current password and click the "Disable" button. If an incorrect password is entered, the TCT will inform you about this with a corresponding text. If you save changes to the device, the TCT will additionally inform you that the password has been deactivated.

To disable the password, open the "System" tab, then "Configuration password" and click the "Disable" button. Enter the current password and click the "Disable" button. If an incorrect password is entered, the TCT will inform you about this with a corresponding text. If you save changes to the device, the TCT will additionally inform you that the password has been deactivated.

'''NOTE: The Primary password cannot be disabled when the Recovery password is enabled.'''

'''NOTE: The Primary password cannot be disabled when the Recovery password is enabled.'''

== How to unlock device if you forgot your password ==

== How to unlock device if you forgot your password ==

[[File:Recovery password required.png|left|thumb|Recovery password required]]

[[File:Recovery password required.png|left|thumb|Recovery password required]]

After entering the recovery password, TCT will prompt the user to set a new primary password. The user also has 5 attempts to enter the recovery password.

If you have forgotten your device password, you must exhaust 5 password attempts, after which, if recovery password is set, TCT will suggest to enter recovery password (other wise device will be blocked immediately). The user also has 5 attempts to enter the recovery password.

 

After entering the recovery password, TCT will prompt the user to set a new primary password.

If the user enters recovery password incorrectly more than 5 times, the device will be locked, the user will see a corresponding message and unlock code.

If the user enters recovery password incorrectly more than 5 times, the device will be locked, the user will see a corresponding message and unlock code.

 

[[Category: Telematics Configuration Tool (TCT)]]

[[File:Password save to the device.png|thumb|Password save to the device]]