Difference between revisions of "MINI-CAN"
From Wiki Knowledge Base | Teltonika GPS
(Certifications & Approvals/MINI-CAN REACH added.) |
|||
Line 71: | Line 71: | ||
==Nomenclature, classification codes== | ==Nomenclature, classification codes== | ||
* [[MINI-CAN LITAR]] | * [[MINI-CAN LITAR]] | ||
+ | |||
+ | == Certifications & Approvals == | ||
+ | |||
+ | * MINI-CAN REACH | ||
==FAQ== | ==FAQ== |
Revision as of 15:33, 2 April 2021
Main Page > EOL Products > MINI-CANMINI-CAN is contactless adapter used to read vehicle CAN Bus data. MINI-CAN adapter should be used in combination with:
It reads can-bus data through the isolation of wires without damaging them and forwards signals to the tracking device.
Features
- MINI-CAN collects vehicle data from CAN bus without damaging the wires
- Powered from an on-board power source
- Reads the signals through the isolation of CAN bus wires
- Easy to install and operate
Technical features
PARAMETER | VALUE | ||||
---|---|---|---|---|---|
Minimum | Typical | Typical | Maximum | Unit | |
Supply Voltage | |||||
Supply Voltage (Recommended Operating Conditions) | +9 | +12 | +24 | +63,5 | V |
Current Consumption | |||||
Working Mode | 8,3 | 4,3 | mA | ||
Sleep Mode | 1,6 | 0,91 | mA | ||
Operating Temperature | |||||
Operating Temperature | -40 | +85 | °C |
- Dimension: 41.6 x 18.9 x 12.5 mm
- Weight: 9,1 g
- CAN-BUS speeds from 33,33 to 500 kb/s
- Automatically sets CAN Low, CAN High polarity
- Automatically adjusts signal level and speed
Nomenclature, classification codes
Certifications & Approvals
- MINI-CAN REACH
FAQ
- How to install MINI-CAN with LV-CAN200/ALL-CAN300 using:
YouTube
Teltonika CAN adapters Part 1: Introduction
Teltonika CAN adapters Part 2: Installation