| rowspan="1" style="text-align: left; style=" width: 150px; background: white; color: black;" |Captures appropriate file with the provided details. If the connection to server is opened, them files immediately become available for download. If not, then connection is tried to be made. If <domain> and <port> parameters are included, the device will send footage of the command to that address.
|}
The arguments are as follows:
*<file_type>
**0 - Video
**1 - Photo
*<file_source>
**1 - Front camera
**2 - Rear camera
**3 - Both cameras
*<timestamp>
**Unix timestamps in decimal (not required for photo download)
*<duration>
**Video duration in seconds from provided timestamps (not required for photo download), (max 30 sec)
Video request from source <1-3> for <1-255> seconds since YYYY-MM-DD HH:MM:SS.
'''(If video request)'''
| colspan="2" |Preparing to send file from timestamp <timestamp of the file>
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Request successful but the device was already connected to the server. Device is ready to send selected file
| colspan="2" |Already connected. Preparing to send file from timestamp <timestamp of the file>
|-
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Request received but the capture failed
| colspan="2" |Error: capture failed
|-
|Request received but the device cannot proceed with the capture and sending because ignition is off
| colspan="2" |Error: Cannot capture because ignition is off
|-
|Request received but the previously captured and prepared photo/video was not sent. New media is not captured. The device is ready to send the previous capture
| colspan="2" |Warning: Photo / Video already captured previously, trying to send it
|-
|Request received but the device was already connected to the server. New media is not captured. The device is ready to send previous capture
| colspan="2" |Already connected. Warning: Photo / Video already captured previously, trying to send it
|-
|Request received but the camera doesn’t acknowledge sent command. Nothing will be sent
| colspan="2" |Error: DualCam NAK
|-
|Request received but the camera is not connected or not working
| colspan="2" |Error: DualCam not present
|-
|Request received but the camera is not connected or not working
| colspan="2" |Error: requested file does not exist
|-
|Request received but the device cannot connect to the server
| colspan="2" |Error: connect to server
|-
|Request received but the modem is not ready for operation (network or modem issue)
| colspan="2" |Error: modem not ready to start send
|-
|Request received but the device cannot proceed with the capture and sending because the camera is being reconfigured
| colspan="2" |Cannot send, DualCam configuration is in progress
|-
|Request received but file capture time was exceeded.
| colspan="2" |Error: Media request timeout
|-
|Request received but capture completed incorrectly
| colspan="2" |Error: Media request problem
|-
|File type parameter incorrect in the request command
| rowspan="4" |Error: Invalid
|File Type
| rowspan="4" |argument in camera request cmd!
|-
|File Source parameter incorrect in the request command
|File Source
|-
|Timestamp parameter incorrect in the request command
|Timestamp
|-
|Duration parameter incorrect in the request command
|Duration
|-
|Cannot proceed with the request, ignition is off
| colspan="3" |Error: Ignition not detected!
|-
|Request command structure incorrect
| colspan="3" |Error: Invalid camera request command!
|-
|RS232 and DualCam mode is not enabled
| colspan="3" |Error: DualCam is not configured!
|-
|Front or rear camera not found
| colspan="3" |Error: Front / Rear Camera not present
DualCam camera support was introduced from firmware version 03.27.06.Rev.360. A new RS232 mode "DualCam"
was added with parameters for setting control. The details of the RS232 mode parameter are provided in the table below.
Parameter name
Parameter ID
Parameter value
RS232 Mode
151
18
size
Configuration version 8.14.1.0 has to be used if configuration is being made in offline mode.
<be>
Camera Feature Settings Parameters ID
size
Once this mode is enabled, new tab “Camera Settings” appears on the left sidebar. This will contain the main parameters for configuring the camera settings The parameter IDs and values are provided in the table below. Once configuration is
saved to device, these parameters are updated.
Parameter name
Parameter ID
Parameter values
Default values
Camera Picture Resolution
66000
0 - 160 x 120
3
1 - 320 x 240
2 - 640 x 480
3 - 1280 x 720
4 - 1920 x 1080
Camera Picture Compression
66001
[0 - 100] (%)
50
OSD Display
66002
0 - Disabled
0
1 - Enabled
Video Frame Rate
66003
20, 25 and 30 (frames per second)
30
OSD display - On Screen Display feature displays date and time in the upper left corner of the photo. This feature can be enabled or disabled.
<be>
Camera Scenario Settings Parameters ID
size
"Camera settings" tab also contains scenario settings that trigger camera video/photo capture when specific condition is met.
Parameter name
Parameter ID
Parameter values
Default values
Periodic Image sending
66006
0 - Disabled
0
1 - Front Camera
2 - Rear Camera
3 - Both Cameras
Sending interval
66007
[10-1800] (seconds)
600
Image Sending Trigger
66022
0 - None
0
2 - DIN1
4 - DIN2
8 - Crash
16 - Towing
32 - Idling
64 - Geofence
128 - Unplug
256 - Green Driving
Video sending trigger
66023
0 - None
0
2 - DIN1
4 - DIN2
8 - Crash
Video duration before trigger
66009
[1-10] (seconds)
5
Video duration after trigger
66010
[1-10] (seconds)
5
Camera Scenario Mode
66020
0 - On Ignition
0
1 - Always
Video source for trigger DIN1
66040
0 - None
0
1 - Front
2 - Rear
3 - Front and Rear
Video source for trigger DIN2
66041
0 - None
0
1 - Front
2 - Rear
3 - Front and Rear
Video source for trigger Crash
66042
0 - None
0
1 - Front
2 - Rear
3 - Front and Rear
Video sending by trigger
Video sending by trigger camera scenario monitors the selected trigger (video sending trigger parameter) and captures video from front, rear or both cameras before and after the event (video duration before trigger and video duration after trigger parameters). If the previously captured video has not finished downloading, then a new video capture is skipped until the old one has been sent. When this scenario is triggered, high priority eventual record is generated with the value corresponding to what triggered the scenario. See the table below.
Parameter name
Parameter AVL ID
Parameter value
SOS trigger
499
0 - Server request
1 - DIN1
2 - DIN2
3 - Crash
Image sending trigger
Added Image sending trigger option (works the same way as Video sending trigger just triggers image sending). Both front and rear images will be sent.
For selecting multiple options using SMS/GPRS commands, add values of every option and set that value for this parameter.
For example, to set DIN1 (2), Crash (8), and Unplug (128) scenarios as triggers, add their values (2 + 4 + 128 = 138) and set the sum as the parameter value
