Template:FMB6 debug
Appearance
Revision as of 15:46, 7 February 2019 by Gediminas.suminas (talk | contribs) (Created page with "Document is dedicated for debugging FMB6XY devices. <br/> For successful device debug, make sure that your device firmware version is the latest: <br/> * FMB640 - FMB640 fir...")
Document is dedicated for debugging FMB6XY devices.
For successful device debug, make sure that your device firmware version is the latest:
FMS
| FMS | Description |
|---|---|
| 1 | Brake switch |
| 1 | Wheel based speed |
| 1 | Cruise control active |
| 1 | Clutch switch |
| 1 | PTO state |
| 1 | Accelerator pedal position |
| 1 | Engine percent load at current speed |
| 1 | Engine total fuel used |
| 1 | Fuel level |
| 1 | Engine speed |
| 1 | Axle position |
| 1 | Tire location |
| 1 | Axle weight |
| 1 | Engine total hours of operation |
| 1 | Vehicle identification number |
| 1 | SW-version supported |
| 1 | Diagnostics supported |
| 1 | Requests supported |
| 1 | High resolution total vehicle distance |
| 1 | Service distance |
| 1 | Vehicle motion |
| 1 | Driver 2 working state |
| 1 | Driver 1 working state |
| 1 | Vehicle overspeed |
| 1 | Driver 1 time rel. state |
| 1 | Driver 2 time rel. state |
| 1 | Driver 1 card |
| 1 | Driver 2 card |
| 1 | Direction indicator |
| 1 | Tachograph performace |
| 1 | Handling operation |
| 1 | System event |
| 1 | Tachograph vehicle speed |
| 1 | Engine coolant temperature |
| 1 | Ambient air temperature |
| 1 | Driver 1 / 2 identification numbers |
| 1 | Fuel rate |
| 1 | Instantaneous fuel economy |
| 1 | At least one PTO engaged |
| 1 | High resolution engine total fuel used |
| 1 | Combined Vehicle Weight |
| 1 | Brake Pedal Position |
| 1 | AdBlue |