Configuring Blue Puck/Coin/Slim ID beacons

Configuring Blue Puck/Coin/Slim BLE advertising Beacon

1. Bluetooth LE Blue Puck, Blue Coin and Blue Slim beacons are disabled by default. Configurations to these beacons are written through NFC. To do this download Device Manager Mobile by Ela from Google Play Store to your device, can be also downloaded to your Apple phone, tested with iPhone X model.

Note: Device that is used for configuring Blue Puck/Coin BLE advertising sensors must support NFC read/write functionality.

2. Follow these instructions to easily configure Blue Puck/Coin/Slim Bluetooth LE advertising Beacon:

• Enable Bluetooth and NFC on your Android-powered device.
• Launch Device Manager Mobile on your device.
• Select Configuration.
• Place your device on top of Blue Puck/Coin/Slim BLE advertising Beacon to scan it.
• Click Enable to allow Blue Puck/Coin/Slim Beacon transmit advertising data.
• Place your device on top of Blue Puck/Coin/Slim BLE advertising Beacon again to scan the changes.
  

• We recommend to set Power to 4 to get the best possible distance.
• Set TAG Format to iBeacon.
• Set BLE Emit Period to 1 seconds to get best possible sensor detection.
• Click Write button.
• Place your device on top of Blue Puck/Coin/Slim BLE advertising sensor to write configuration to it.

• Any Beacon ID can be typed in, as long as it in hex format.

Note: Beacon UUID must have 32 values set.

In the example below, Beacon UUID is AAAAAAAAAAAAAAAAAABBCC526F6F6D31 When converted from HEX to DEC, 526F6F6D31 means Room1, to make beacon identifying easier.
Major: 5231 when converted from HEX to DEC, it means R1
Minor: 010A

Configuring device

Before Beacon configuration, visit how to set up your device for the very first data sending to the server: Setting up your configuration for the very first data sending to the server

These are instructions on how to easily configure ELA Blue Puck/Coin/Slim Beacon ID with Teltonika Configurator on GH5200 device.

1. First the device Bluetooth settings need to be configured. These are the required steps:

• Press Bluetooth settings
• Turn on BT Radio by pressing Enable (hidden) or Enable (visible)

2. Press Beacon list tab.

• Select All or Configured (for seeing only preferred beacons) in Beacon Detection options.
  
• If you have selected Configured to see preferred beacons, you must add beacons to the Beacons list.
  
• Select Periodic option
• Set Periodic settings according to your needs.
  
• After all these steps press Save to device to save the configuration.
  

To find out how to add beacons to the Beacons list, click on one of the devices: TST100 | TFT100 | GH5200 | TMT250

3. Now you can see detected Beacons in Status -> Beacons List

4. Example of the server view:

In the server view picture above, displayed:

• The date when the packet arrived to the server
• Device IMEI number
• AVL ID 385 – Beacon AVL ID
• Beacon ID and RSSI
  

Beacon 1 ID: 0102030405060708090A0B0C0D0E0F00020B010A
Beacon 1 Major: 020B
Beacon 1 Minor: 010A
RSSI: -60

Beacon 2 ID: AAAAAAAAAAAAAAAAAABBCC526F6F6D31
Beacon 2 Major: 5231
Beacon 2 Minor: 010A
RSSI: -56

Configured iBeacon packet data structure

Example of configured data parsing which comes with AVL ID 385
Two detected Beacons:

11210102030405060708090A0B0C0D0E0F00020B010AC421AAAAAAAAAAAAAAAAAABBCC526F6F6D315231010AC8
	Data Part1	11
First Beacon:
	iBeacon with RSSI flag2	21
	UUID (Beacon #1)	0102030405060708090A0B0C0D0E0F00
	Major	020B
	Minor	010A
	RSSI (Signal Strength: Signed 2's complement)	C4 (-60)
Second Beacon:
	iBeacon with RSSI flag2	21
	UUID (Beacon #2)	AAAAAAAAAAAAAAAAAABBCC526F6F6D31
	Major	5231
	Minor	010A
	RSSI (Signal Strength: Signed 2's complement)	C8 (-56)

¹ Data part 11 - 1 Record out of 1 Beacon record. First half byte specifies current record, second half specifies how many there are in total. For example: 23 - second record out of three records (that means the server can expect 1 more records with Event I/O ID 385). If the data does not fit in a single data transfer, they are separated. Data Part is used to determine if more data will be coming from the device. Maximum value of the Data part is 33.

² Flags:

Flags:
21	iBeacon with RSSI
23	iBeacon with RSSI, Battery Voltage
27	iBeacon with RSSI, Battery Voltage, Temperature
01	Eddystone with RSSI
03	Eddystone with RSSI, Battery Voltage
07	Eddystone with RSSI, Battery Voltage, Temperature