Why does TAT100 not send data?
Revision as of 11:13, 29 March 2023 by Martyna.D (talk | contribs) (Protected "Why does TAT100 not send data?" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
Main Page > Autonomous Trackers > TAT100 > TAT100 FAQ > Why does TAT100 not send data?
1. Make sure Tracking settings are configured correctly, according to these instructions
2. Check if your APN , Domain and Port entered correctly and GPRS data is Enabled. |
3. In some rare cases it helps to clear the device's memory:
It could be done remotely using SMS/GPRS command sdformat.
More info about the commands here.
|
NOTE! Please do not change Open Link Timeout in TAT100 configuration
GPRS -> Record Settings -> Open Link Timeout -> Should be set to [30] / Response Timeout -> Should be set to [30] / Network Ping Timout -> Should be set to [0] |
|
|
NOTE! Scheduler days has to be selected to enable data sending. More info here. |