FMB lvcancheck

Revision as of 07:40, 11 September 2023 by Jurij.lepechin (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Possible responses:

From ALL-CAN300:
- CANX:0xYY[,], where:
  - X – CAN number
  - YY – the status of CAN line:
    - 00 – CAN not connected, connection not required
    - 01 – CAN connected, but currently module is not receiving data
    - 02 – CAN not connected, requires connection
    - 03 – CAN connected
- Examples of responses:
  - CAN1:0x03,CAN2:0x02,CAN3:0x03
  - CAN line flags are empty!
  - LVCAN not detected

From CAN-CONTROL, FMB140:
- CANX:0xYY[,], where:
  - X – CAN number
  - YY – the status of CAN line:
    - 00 – CAN connected, but currently module not received data
    - 01 – CAN connected, the module is currently receiving data
    - 02 – CAN not connected, requires connection
    - 03 – CAN not connected, connection not required
- Examples of responses:
  - CAN1:0x03,CAN2:0x02,CAN3:0x03
  - CAN line flags are empty!
  - LVCAN not detected

From FMB150, FMC150, FMM150:
- CANX:0xYY[,], where:
  - X – CAN number
  - YY – the status of CAN line:
    - 00 – CAN connected, but currently module not received data
    - 01 – CAN connected, the module is currently receiving data
    - 02 – CAN not connected, requires connection
    - 03 – CAN not connected, connection not required
- Examples of responses:
  - CAN1:0x03,CAN2:0x02,CAN3:0x03
  - CAN line flags are empty!

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FMB_lvcancheck&oldid=88997"