There is no GSM network coverage in the area or the GSM antenna is not connected, broken.
...GSM network. You should hear a normal calling tone. If you can’t check GSM network coverage with mobile phone and the device has an external antenna try anoth
4 KB (609 words) - 16:26, 28 December 2023
...he video should only be used with Truphone SIM cards - please contact Your network operator for the exact APN details, if You are using different SIM cards.''
At first, the device will have default factory settings set. These settings should be changed according to the user's needs.<br />
30 KB (4,424 words) - 10:57, 22 March 2024
...pply must be carried out in a very low impedance point of on-board vehicle network. These points in the car are the battery terminals. Therefore, we recommend
In the picture below you can find were located GPRS settings and what settings need to be configured:
15 KB (2,350 words) - 14:10, 31 January 2023
...tion_settings.png|thumb|right|Incoming Call Action settings under SMS/Call Settings]]}}}
===Bluetooth settings configuration===
2 KB (374 words) - 15:55, 27 October 2023
...bove-mentioned challenges. Professional tracker FMC640 with 4G (LTE Cat 1) network coverage (including fallback to 2G (GSM) and 3G (UMTS) networks) can be set
[[File:GPRS settings.png|alt=|left|thumb|258x258px]]
23 KB (2,966 words) - 09:30, 13 January 2022
...ends the gathered data, combined with its GNSS location details, via a GSM network to a server for analysis. The data can be monitored via PC, laptop, tablet
[[File:GPRS settings.png|alt=|left|thumb|258x258px]]
20 KB (2,538 words) - 15:10, 6 December 2023
...ard''' to access FOTA WEB and send data to the server by accessing the GSM network.
..._Started#Default_FOTA_WEB_configuration_settings:|the device configuration settings for FOTA WEB]] are correct.
19 KB (2,631 words) - 14:08, 24 January 2024
*In '''RS232\RS485''' settings change '''Mode''' to ''RS232'' and in '''RS232 Mode''' select ''DualCam''
...alCam'' server information. In '''RS232\RS485''' fill in '''DualCam Server Settings''' with ''Domain'' and ''Port'' entries.
10 KB (1,525 words) - 15:51, 11 April 2024
*In '''RS232\RS485''' settings change '''Mode''' to ''RS232'' and in '''RS232 Mode''' select ''DashCam''
...shCam'' server information. In '''RS232\RS485''' fill in '''DashCam Server Settings''' with ''Domain'' and ''Port'' entries.
9 KB (1,503 words) - 15:52, 11 April 2024
...Manual CAN Commands functionality can be found at the bottom of Manual CAN Settings tab in configurator.
...ers using SMS/GPRS commands or in configurator at the bottom of Manual CAN Settings tab.<br><br>
6 KB (998 words) - 10:38, 27 March 2023
*Improved network scan sequence and AT commands
*Added network settings configuration capability for FMM1YX devices
3 KB (393 words) - 16:31, 26 February 2020
...ave default factory settings unless you order pre-configured device. These settings should be changed according to the user's needs.<br/>
...portant configurator sections are GPRS – where all your server and '''GPRS settings''' can be configured and '''Tracking''' – where data acquiring parameters
15 KB (2,270 words) - 15:24, 4 January 2024
...ave default factory settings unless you order pre-configured device. These settings should be changed according to the user's needs.<br/>
...portant configurator sections are GPRS – where all your server and '''GPRS settings''' can be configured and '''Tracking''' – where data acquiring parameters
15 KB (2,266 words) - 15:25, 4 January 2024
...ave default factory settings unless you order pre-configured device. These settings should be changed according to the user's needs.<br/>
...portant configurator sections are GPRS – where all your server and '''GPRS settings''' can be configured and '''Tracking''' – where data acquiring parameters
15 KB (2,270 words) - 10:00, 16 January 2024
...ave default factory settings unless you order pre-configured device. These settings should be changed according to the user's needs.<br/>
...portant configurator sections are GPRS – where all your server and '''GPRS settings''' can be configured and '''Tracking''' – where data acquiring parameters
15 KB (2,270 words) - 16:21, 16 January 2024
===Bluetooth® settings configuration===
...nd {{{model_2|FMB}}} device. First the {{{model_2|FMB}}} device Bluetooth® settings need to be configured. These are the required steps:
3 KB (485 words) - 11:24, 8 March 2024
===Bluetooth® settings configuration===
...nd {{{model_2|FMB}}} device. First the {{{model_2|FMB}}} device Bluetooth® settings need to be configured. These are the required steps:
3 KB (485 words) - 11:25, 8 March 2024
'''Note:''' '''Only changes''' option saving method always includes FOTA WEB settings (ID: 13003) parameter in order to send configuration over the air.
...[File:Savefullnew.gif|alt=|right|339x339px]]If you want to change only APN settings without other changes, you can follow this:
4 KB (564 words) - 12:14, 19 April 2023
===Bluetooth® settings configuration===
...}} device. First, we need to configure {{{model_2|FMB}}} device Bluetooth® settings. These are the required steps:
3 KB (523 words) - 10:41, 27 December 2023
===Bluetooth® settings configuration===
...}} device. First, we need to configure {{{model_2|FMB}}} device Bluetooth® settings. These are the required steps:
3 KB (523 words) - 16:28, 28 December 2023
