This page will provide you with all the necessary information needed to successfully launch the TCT application on your PC for the first time. Moreover, we will cover the different types of configuration files (offline vs online) you can create with the help of TCT.
Minimum System Requirements
OS
Windows 10; Windows 11
CPU
Intel or AMD processor with 64-bit support
Disk Storage
1 GB of free disk space
Memory
500 MB of free RAM
Graphics
DirectX 9 or later with WDDM 1.0 driver
Internet
Ethernet port or Wi-Fi w/ network access for auto-update
Added the ability to connect to the device port and send supported commands in Terminal tool.
Added internal device binary debug files converting to text in Terminal tool.
Installation guide
Follow the steps below in order to install TCT on your PC:
Install TelematicsConfigurationTool.Setup.exe with admin privileges.
Accept the license agreement.
Choose whether TCT should be available to all users or just to you (current user).
Select the location where you want to install TCT. By default, TCT is installed in the program files. However, you can install it anywhere you want.
Wait until the installation is complete and click Finish to exit installation wizard.
Information below is relevant for TCT version 1.1.80 or older.
IMPORTANT NOTES
Windows smart screen may appear during first installation. If this occurs please follow the steps below:
Click on More info to access additional details about the application;
Make sure that the application name is TelematicsConfigurationTool.Setup.x.x.x.exe. Take into account that "x" represents the version of TCT and can differ depending on the installation file you have;
Make sure that the publisher is TELTONIKA TELEMATICS;
If everything is correct, please click on Run anyway;
After confirmation the installation setup will start immediately.
Teltonika COM Driver Installation
Teltonika COM Driver is a serial communication port driver for Teltonika Telematics device, It is one of the requirements for TCT to work properly, without this driver TCT will not detect your Teltonika Telematics device.
In TCT device will appear on Discovered devices list.
Click Configure button.
Configure device and save the changes you've made by click on Save to device button.
Editing a Configuration File
In order to open an existing configuration file, follow the steps below:
In offline configuration section click on Open button.
Select the configuration file and click Open.
Wait for the configuration file to load, edit it and save the changes you've made by click on Save to file button.
IMPORTANT NOTES
On the left side of the TCT window, you will find the configuration name under Configuration once file is loaded.
Differences between Offline and Online Configuration
Offline configuration refers to creating a configuration without any device connected. Later you can load this configuration file created in offline mode into the device remotely (via FOTA WEB) or when a device is connected to your PC. On the other hand, Online Configuration refers to creating a configuration with a device connected and you can directly save the changes into the device.
Launching TCT web version
Start up guide
Follow the steps below in order to start using TCT:
