Multiple Company Cards

From Wiki Knowledge Base | Teltonika GPS
Revision as of 15:44, 3 September 2020 by Gediminas.suminas (talk | contribs) (Created page with "==Introduction== Teltonika WEB TACHO solution can support '''Single Slot Readers''' and '''Multiple Slot Readers''', such as "LISLE Hyper Card Rack™". One of the limitation...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > Software & Applications > WEB Tacho > Multiple Company Cards

Introduction

Teltonika WEB TACHO solution can support Single Slot Readers and Multiple Slot Readers, such as "LISLE Hyper Card Rack™". One of the limitations with Single Slot smart card readers is that only up to 10 readers can be connected to a single PC or server. This is not a good solution when your business keeps expanding and more and more company cards have to be connected to WEB TACHO.
Teltonika's solution to this issue:

Hyper-card-rack-120-img1.png Hyper-card-rack-120-img3.png Hyper-card-rack-20-img1.png

Key features and benefits

  • No USB limitations on CPU. As you may know, various operating systems allow you to connect a limited amount of card readers at the same time. With the Hyper Card Rack™ solution you will be able to connect up to 6000 company cards simultaneously to one CPU
  • Scalable solution. You can add as many modules as you need at a time. You can grow your Hyper Card Rack™ installation when your customer base is growing. Each module supports 30 cards
  • Small foot-print - less space used. Having many separate card readers requires a lot of space and creates a mess in your office or maintenance area. Modules can be installed on drawers, walls, or desks

NOTE THAT - Only Hyper Card Rack is supported by WEB TACHO. Standard Card Rack is not supported

Requirements

Requirements for connecting Lisle Hyper Card Rack with WEB TACHO:

  • Smart Card Reader Software version 4.0.X.Y or newer
  • The latest .NET Framework version. Download .NET Framework here
  • The latest drivers for Lisle. Download Hyper Card system drivers here

Multiple Rack Configuration

Hyper-card-rack-120-img5.png

When there is more than one Hyper Card Rack™ 20 or Hyper Card Rack™ 120 connected to the Server or PC, each rack must be configured using "DIP" switches. "DIP" switches can be interpreted as a BINARY more, where:

  • the first rack is "0000" (all switches are OFF)
  • the second rack is "0001" (only the first switch is ON)
  • the third rack is "0011" (first and second switches are ON)
  • the forth is "0100" (only the third switch is ON), etc.

Multiple rack configuration example: Hyper-card-rack-120-img4.png

External links

Hyper Card Rack™ 120 - click here
Hyper Card Rack™ 20 - click here

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Multiple_Company_Cards&oldid=59576"