Changes

* Value – shows scanned value of parameter;

* Value – shows scanned value of parameter;

* Send data to server – allows to choose the type of data when it‘s generated:

* Send data to server – allows to choose the type of data when it‘s generated:

* Disabled – Data will not be collected

○ Disabled – Data will not be collected;<br>

* On low priority – records will be generated as low priority events;  

○ On low priority – records will be generated as low priority events; <br>

* On high priority – records will be generated as high priority events and immediately sent to server via GPRS (if GPRS is available);

○ On high priority – records will be generated as high priority events and immediately sent to server via GPRS (if GPRS is available);<br>

* On panic - records will be generated as panic priority events and immediately sent to server via GPRS, if GPRS is not available records will be sent via SMS messages;

○ On panic - records will be generated as panic priority events and immediately sent to server via GPRS, if GPRS is not available records will be sent via SMS messages;<br>

* Data acquisition type – allows to choose when records are generated:

* Data acquisition type – allows to choose when records are generated:

*Monitoring – monitors data;

○ Monitoring – monitors data;<br>

*On change – record is generated when parameter value is changed;

○ On change – record is generated when parameter value is changed;<br>

*Hysteresis – record is generated when increasing parameter value becomes higher than High value, and decreasing becomes less than Low value

○ Hysteresis – record is generated when increasing parameter value becomes higher than High value, and decreasing becomes less than Low value;<br>

*Event on exit – record is generated when parameter value becomes higher than High value or lower than Low value;

○ Event on exit – record is generated when parameter value becomes higher than High value or lower than Low value;<br>

*Event on entrance – record is generated when parameter value becomes between High and Low values;

○ Event on entrance – record is generated when parameter value becomes between High and Low values;<br>

*Event on both – record is generated when parameter value crosses High or Low values;

○ Event on both – record is generated when parameter value crosses High or Low values;<br>

* Low – allows to choose low value for Data acquisition;

* Low – allows to choose low value for Data acquisition;

* High – allows to choose High level for Data acquisition;

* High – allows to choose High level for Data acquisition;