Template:FMB SMS/GPRS Commands

From Wiki Knowledge Base | Teltonika GPS

Commands apply for these devices:

FMB001 FMB010 FMB002 FMB020 FMB003 FMB110 FMB120 FMB122 FMB125 FMB130 FMB202 FMB204 FMB208 FMB900 FMB920 FMB962 FMB964 FM3001 FMT100 FMC001 FMC003 FMC00A FMM001 FMM003 FMM00A FMC125 FMC130 FMM125 FMM130 FMU125 FMU126 FMU130 MTB100 FMB140

All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.
If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.

SMS command structure:

<SMS login><space><SMS password><space><command><space><value>

SMS command getinfo example:

  • If you have set SMS login and password: login pass getinfo
  • If SMS login and password are not set leave two spaces before command:   getinfo


GPRS commands require Codec 12 protocol.

To search for compatible products, Expand all content

Common commands


Command Description Response HW Support Parameter Group
getinfo Device runtime system information. Yes Common commands
getver Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address. Yes Common commands
getstatus Modem Status information. Yes Common commands
getgps Current GPS data, date and time. Yes Common commands
getio Readout analog input,digital input and output. Yes Common commands
ggps Returns location information with Google maps link. Yes Common commands
readio # Returns IO status, # AVL ID. Yes Common commands
cpureset Resets device No Common commands
fwstats Get data about FW and restarts Yes Common commands
getrecord SMS command initiates saving and sending of high priority record. No Common commands
getimeiccid # Response is sent to SMS/GPRS command sender and also to GSM number provided. # - GSM number using international format e.g. 37069012345 Yes Common commands
getimsi Sends the IMSI number of the SIM card inserted as a response to the sender.


If two SIM cards are inserted in the device, the response will be the IMSI number of the currently active SIM card.

Note: This command is supported from 03.10.02 firmware version.
Yes Common commands
allver Responds with information about hardware and firmware versions and storage space Yes Common commands
getparam # Returns selected parameter value.

# - first ID value. # - second ID value. # - third ID value.

SMS command is limited to 160 characters.
Yes Common commands
getparam #;#;…
setparam #:# Sets selected parameter value

[Parameter ID] : [New Parameter Value] ; [Parameter ID] : [New Parameter Value]...

SMS command is limited to 160 characters.
Yes Common commands
setparam #:#;#:#;…
flush #,#,#,#,#,#,# Redirects device to other server.

1.# - IMEI.
2.# - APN.
3.# - LOGIN.
4.# - PASS.
5.# - IP.
6.# - PORT.

7.# - MODE (0-TCP/1-UDP).
Yes Common commands
countrecs Returns records number. Yes Common commands
web_connect Forces device to connect to Fota WEB immediately. Yes Common commands
deleterecords Delete all records from SD card. Yes Common commands
setdigout ## Y1 Y2 Z1 Z2 Set digital output.

1.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1.
2.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2.
Y1 – timeout value for DOUT1 if needed (in seconds).
Y2 – timeout value for DOUT2 if needed (in seconds).
Z1 – maximum speed value for DOUT1 if needed.

Z2 – maximum speed value for DOUT2 if needed.
Yes Common commands
setigndigout ### Y1 Y2 Y3 Set digital output when ignition is off.

1.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1.
2.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2.
3.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT3.
Y1 – timeout value for DOUT1 if needed (in seconds).
Y2 – timeout value for DOUT2 if needed (in seconds).
Y3 – timeout value for DOUT3 if needed (in seconds).

Yes Common commands
battery Returns battery state info. Yes Common commands
wdlog Returns all information about 'watch dogs' Yes Common commands
defaultcfg Load default configuration. Yes Common commands
setkey # # Add new or change current configuration keyword. If device is locked, keyword cannot be changed.

1.# - old keyword (if adding new keyword space).

2.# - new keyword.
Yes Common commands
delkey # Remove existing keyword (If device is locked, keyword cannot be changed).
# - old keyword.
Yes Common commands
bbread # Return black box information (HEX value of event ID and HEX value of custom data field (optional)).
# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.
Yes Common commands
bbinfo # Return same information as bbread command but additional all events timestamp is written in HEX.
# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.
Yes Common commands
sdformat Format SD card. Yes Common commands

Bluetooth Commands


Command Description Response HW Support Parameter Group
btgetlist # Returns requested Bluetooth list.
# - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected, 3 – Discovered BT4/BLE devices).
Yes Bluetooth commands
btscan Starts Bluetooth scan. Yes Bluetooth commands
btvisible # Sets Bluetooth to visible with TMO.
# - visibility TMO (from 1 to 255 seconds).
Yes Bluetooth commands
btrelease # Disconnects from current device and pauses auto connect functionality for TMO.
# - none or TMO (from 1 to 255 seconds).
Yes Bluetooth commands
btunpair # Unpair Bluetooth device.
# - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address).
Yes Bluetooth commands

Commands Related to Features


Command Description Response HW Support Parameter Group
fc_reset Resets fuel consumption parameters. Yes Commands related to features
towingreact Towing reactivation. Yes Commands related to features
auto_calibrate:get Returns the state of calibration. Yes Commands related to features
odoset:# Set total odometer value.
# - new odometer value in km.
Yes Commands related to features
odoget Display current odometer value. Yes Commands related to features
on_demand_trackingX

X=0 – Stops Tracking on Demand functionality.
X=1 – Starts Tracking on Demand functionality.
X=2 – Generates one high priority record and inititates data sending to server.

Note: This command is supported from 03.25.06 firmware version.
Yes Commands related to features

OBD Commands


Command Description Response HW Support Parameter Group
obdinfo Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays all available information from OBD. Yes OBD Commands
faultcodes Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays all visible fault codes. Yes OBD Commands
cleardtc Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Command clears all vehicle stored fault codes. Yes OBD Commands
getvin Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays vehicle VIN code. Yes OBD Commands

CAN Adapter Commands


Command Description Response HW Support Parameter Group
lvcangetinfo UniqID: 0031C22F41400014000535305039594D53, FWVer: 00010000, BLVer: 00000300, GIT-SHA1: 2490222, Rev: 0, FW date: 2022-05-16, Kernel: 473, Option: 01

Explanation of values: UniqID - contains the unique ID of the CAN MCU, generated from internal registers

FWVer - CAN MCU firmware version. Example: 00010000here 00 - BRANCH version, 01 - MAJOR version, 00 - MINOR version, 00 - PATCH version
Yes CAN Adapter Commands
lvcanclear # Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.
# - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted))..
Yes CAN Adapter Commands
oeminfo

Vehicle: Mazda/6 FL2/2019, GenTime: 1970-1-1 0:0:0, LS:0, DB:0, DBG:0, LE:41, FVer:1
Explanation of values: Vehicle - contains the vehicle, the OEM CAN file is intended forGenTime - contains the CAN OEM file generation date/time LS - last state of CAN OEM functionality (INTERNAL)DB - database variable for CAN OEM file, generated by .NET (INTERNAL)DBG - debug value of CAN OEM file, included by .NET, used for logging, etc (INTERNAL)

LE - loaded CAN OEM file entry count (succesful CAN OEM file entry loading counter) (INTERNAL)

FVer - CAN OEM file version (INTERNAL)
Yes
FMBXXX FMB150
CAN Adapter Commands