FMC125 firmware errata

From Wiki Knowledge Base | Teltonika GPS
Main Page > Special Trackers > FMC125 > FMC125 firmware errata

Introduction

We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.
This document describes FMCXXX, FMUXXX, FMMXXX platform devices firmware improvements, changes, new features implementations as well as current firmware release version.

FIRMWARE VERSION SUPPORTED HARDWARE
03.25.XX FMC1YX, FMU1YX, FMM1YX
03.27.XX FMB0YX, FMB9X0, FMB96X, FMB1YX, FMU1YX, FMM1YX, FMC1YX, FMM001, FMC001, FM30XY, FMB2YX, FMT100

Firmware versioning

  • Structure
FMB(T).VER.[XX].[YY].[ZZ].Rev.[##] _[ID###]
  • Syntax description
    • XX – major FW version.
    • YY – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.
    • ZZ – major changes like bigger fixes, improvements and new features addition.
    • ## – minor changes like small fixes and improvements.
    • ID[###] – Spec ID KEY – Specific clients FW changes.

Firmware versions

FIRMWARE VERSION RELEASE DATE CHANGES
03.27.04.Rev.01
(recommended FMU130, FMU125 FMC130, FMC125, FMM130, FMM125)
2021.03.16
  • Quectel modem reset procedure improvements
  • Optimization of faster network selection
  • Optimization of internal flash usage
  • Fix of GNSS version initialization
  • Added Beacon On Change. functionality
  • Improved system stability and fixed general bugs
03.27.03.Rev.02
(recommended FMU130, FMU125, FMM130, FMC130)
2021.01.28
  • Fix odometer calculation when source selected LVCAN or GNSS
  • DNS fixes and improvements
  • Improved system stability and fixed general bugs
03.27.03.Rev.00
(recommended FMC130, FMC125 for Japan market)
2020.12.16
  • Improved high priority records sending
  • Quectel modem configuration rework
  • Improved system stability and fixed general bugs
03.27.02.Rev.03
(recommended with FMU125 and FMC130 for Latin America and Australia region)
2020.10.28
  • Command "setdigout" fixes when GNSS is not available
  • Periodic BLE scan improvements when using eventual beacon records
  • Improved system stability and fixed general bugs
03.27.02.Rev.01
(recommended FMC130 for EMEA region)
2020.10.25
  • Disable NTP TSYNC in Deep-sleep mode
  • TLS fixes and improvements
03.27.02.Rev.00
2020.09.14
03.25.10.Rev.175
2019.12.23
  • Stability improvements
  • Added Geo bands selection
  • Improved network scan sequence and AT commands
  • Added preferred operator connection
  • Added network settings configuration capability for FMM1YX devices
  • Improved dual sim switching
  • Added FMM1YX support
  • Added FMC1YX support
  • Added FMU1YX support
  • Initial release