FMP100 GPRS settings

From Wiki Knowledge Base | Teltonika GPS
Main Page > Easy Trackers > FMP100 > FMP100 Manual > FMP100 Configuration > FMP100 GPRS settings

GPRS Settings and Server Settings

These settings define the main parameters for FMP100: GSM operator APN and GPRS Username and Password (optional – depending on operator), destination server IP and port, and allows setting the protocol used for data transfers – TCP or UDP.

SIM1 and SIM2 GPRS Settings can be configured separately.

Second Server Settings

Backup server has 4 different modes:

  • Disable: backup server is not used.
  • Backup: records are sent to backup server if main server is not available (for example fails to open link) or when main server response timeout is reached successively 5 times.
  • Duplicate: records are sent to both servers (main and backup), records are deleted from SD-card (or Flash storage) only if both servers accepted the records.

Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator.
FMP100 the device will send the newest records first when Newest is selected in Records Settings, which is useful in cases when the most important parameter set is the most recent one, as a result, other records will be sent right after the newest records are received by AVL application.
Data Link Timeout is used to set termination timeout for the link between FMP100 and AVL application. If FMP100 has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to Deep Sleep mode). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.
Server Response Timeout is used to set a period of time waiting for the response from the server-side.

Records Settings

FMP100 device will send the newest records first when Newest is selected in Records Settings, which is useful in cases when the most important parameter set is the most recent one, as a result other records will be sent right after the newest records are received by AVL application.
Data Link Timeout is used to set termination timeout for link between FMP100 and AVL application. If FMP100 has already sent all records it waits for the new records before closing the link (except for Deep Sleep mode, for more information refer to Deep Sleep mode). If new records are generated during the period of this timeout and the minimum count to send is reached, the records are sent to the AVL application. This option is useful when GSM operator charges for link activation.
Server Response Timeout is used to set a period of time waiting for the response from the server-side.



FOTA WEB Settings

These settings are used to configure FOTA WEB server connection parameters. Status enables or disables FOTA WEB functionality. The address and port number of the FOTA website are entered to Domain and Port fields. Period is used to set the timeout of repeat connections to the FOTA WEB server.


GPRS Settings 25 base.png