Changes

! style="text-align: left;" | Can't set the program number indicated on the scheme

! style="text-align: left;" | Can't set the program number indicated on the scheme

|| No program number in the CAN adapter module memory. || A software update of CAN adapter module is required.

|| No program number in the CAN adapter module memory. || A software update of CAN adapter module is required.

Module software can be updated using Teltonika CAN adapter updater with special Bootloader adapter.

Module software can be updated using Teltonika CAN adapter updater with special Bootloader adapter. Please ask your sales manager for more information.

  CAN adapter can be updated only from software version – '''2013-03-18''' and revision - '''91'''. Module software and revision version can be checked via SMS command - [[FMB lvcangetinfo|'''lvcangetinfo''']].

  CAN adapter can be updated only from software version – '''2013-03-18''' and revision - '''91'''. Module software and revision version can be checked via SMS command - [[FMB lvcangetinfo|'''lvcangetinfo''']].

|-

|-

! style="text-align: left;" rowspan="4" | CAN adapter does not generate data

! style="text-align: left;" rowspan="4" | CAN adapter does not generate data

|| LED diode does not blink – wrong program number || Make sure that the correct program number was introduced (look the connection scheme of CAN adapter).

|| LED diode does not blink – wrong program number. || Make sure that the correct program number was introduced (look the connection scheme of CAN adapter).

|-  

|-  

|rowspan="3"| LED diode does not blink – wrong CAN bus connection || Make sure that the correct CAN bus is connected in the vehicle (look the connection scheme of CAN adapter).  

|rowspan="3"| LED diode does not blink – wrong CAN bus connection. || Make sure that the correct CAN bus is connected in the vehicle (look the connection scheme of CAN adapter).  

|-

|-

| Make sure that the CAN1 and CAN2 buses are not mixed (look the connection scheme of CAN adapter).

| Make sure that the CAN1 and CAN2 buses are not mixed (look the connection scheme of CAN adapter).

| Some parameters declared on the supported vehicle list are available depending on the car's equipment and can be reduced. These parameters also aren't available from, for example, the diagnostic computer level. (For example, OPEL VECTRA C car with Z22SE engine has available the "Fuel level" in the car parameter but in the car with Z22YH engine this parameter is not available). || Can't solve the problem.

| Some parameters declared on the supported vehicle list are available depending on the car's equipment and can be reduced. These parameters also aren't available from, for example, the diagnostic computer level. (For example, OPEL VECTRA C car with Z22SE engine has available the "Fuel level" in the car parameter but in the car with Z22YH engine this parameter is not available). || Can't solve the problem.

|-

|-

| Quick Splice / Fast connectors are being used to connect to CAN bus lines || Sometimes connection places must be soldered because the vehicle CAN bus wires are very thin and CAN adapter wires should be connected directly without using fast connectors.

| Quick Splice / Fast connectors are being used to connect to CAN bus lines. || Sometimes connection places must be soldered because the vehicle CAN bus wires are very thin and CAN adapter wires should be connected directly without using fast connectors.

|-

|-

! style="text-align: left;" rowspan="2" | The connection scheme does not match the car – absence of the wires indicated in the vehicle indicated in the connection scheme  

! style="text-align: left;" rowspan="2" | The connection scheme does not match the car – absence of the wires indicated in the vehicle indicated in the connection scheme  

|| On the east market older models of the vehicles are still produced (for example IVECO EUROCARGO 2008 EURO 3

|| On the east market older models of the vehicles are still produced (for example IVECO EUROCARGO 2008 EURO 3 while on the west market the vehicle meets the EURO 4 standard).

while on the west market the vehicle meets the EURO 4 standard).

  || Look at the connection scheme of vehicle's older models.

  || Look at the connection scheme of vehicle's older models.

|-  

|-