Changes

! style="background: black; color: white;" | Solution

! style="background: black; color: white;" | Solution

|-

|-

! style="text-align: left;" | '''Can't set the program number indicated on the scheme'''

! style="text-align: left;" | Can't set the program number indicated on the scheme

|| No program number in the CAN adapter module memory. || A software update of CAN adapter module is required.

|| No program number in the CAN adapter module memory. || A software update of CAN adapter module is required.

Module software can be updated using Teltonika CAN adapter updater with special Bootloader adapter.

Module software can be updated using Teltonika CAN adapter updater with special Bootloader adapter.

|-

|-

! style="text-align: left;" | 4

! style="text-align: left;" | CAN adapter LED diode still blinks/flashes

|| b || c

|| In some vehicles the vehicle's module is active for a long time and they don't enter in the sleeping mode. The CAN adapter can interpret this as the engine is turned on, which may mean that a wrong program number was selected. || Make sure that the correct program number was introduced (look the connection scheme of CAN adapter).

|-

|-

! style="text-align: left;" | 5

! style="text-align: left;" | CAN adapter generates errors in the vehicle

|| b || c

|| CAN adapter was installed in a different car and has been programmed with incorrect program number. || Make sure that the correct program number was introduced (look the connection scheme of CAN adapter).

|-

|-

! style="text-align: left;" rowspan="2" | 6

! style="text-align: left;" rowspan="2" | The connection scheme does not match the car – absence of the wires indicated in the vehicle indicated in the connection scheme

|| b || c

|| On the east market older models of the vehicles are still produced (for example IVECO EUROCARGO 2008 EURO 3

|| Look at the connection scheme of vehicle's older models.

|-  

|-  

| d || e

| Sometimes the wire colours on the scheme are different from the wire colours in the vehicle. || Please connect to the wires indicated in the connection scheme paying attention to the number of the PINs. The number of the PINs of the diagnostic connector are compatible with the OBD2 standard.

|-

|-

|}

|}