0
edits
Changes
FM63XX/FMB630 and FMB640 and Tachograph Solution (view source)
Revision as of 16:20, 9 November 2018
, 16:20, 9 November 2018no edit summary
Supported devices are: Siemens VDO Digital Tachograph – DTCO 1381 (release 1.3a, 1.4
Supported devices are: Siemens VDO Digital Tachograph – DTCO 1381 (release 1.3a, 1.4
or later) and Stoneridge Tachograph – SE5000 (release 7.1 or later). Version can be checked on
or later) and Stoneridge Tachograph – SE5000 (release 7.1 or later). Version can be checked on
tachograph or in cheque as shown in pictures below
tachograph or in cheque as shown in pictures below:
[[Image:Tacho_version.PNG|800px|center]]
[[Image:Tacho_version_1.PNG|800px|center]]
==CONNECTING TO TACHOGRAPH==
==CONNECTING TO TACHOGRAPH==
[[Image:Tacho_connection.PNG|800px|center]]
<br />
<br />
<big>Before connecting tachograph wires, it is required to measure CAN line resistance
<big>Before connecting tachograph wires, it is required to measure CAN line resistance
• All of the same level CAN-L and CAN-H wires must be interlaced with each other.<br />
• All of the same level CAN-L and CAN-H wires must be interlaced with each other.<br />
[[Image:Wires.PNG|800px|center]]
• CAN wires need to be installed as far as possible from GSM antenna.<br />
• CAN wires need to be installed as far as possible from GSM antenna.<br />
Below is wiring diagram of Tachograph and FM6400/FMB640 device.<br />
<big>Below is wiring diagram of Tachograph and FM6400/FMB640 device:</big><br />
[[Image:Wiring_diagram.PNG|800px|center]]
'''
'''
==CONFIGURING DEVICE==
==CONFIGURING DEVICE==
'''In FMB640 configurator “CAN/Tachograph” section tachograph settings should be set in order to download files.<br />'''
<br />
DDD download source – to which CAN line tachograph is connected;<br />
Tachograph ignition source – which DIN is connected to vehicle ignition ("Ignition" parameter - tachograph ignition source will be the same as configured in "System" -> "Ignition Source");<br />
WEB Tacho Settings:<br />
Status - functionality enabling;<br />
Domain – server domain where files will be send;<br />
Port – server port where files will be send;<br />
Start delay – delay after turning on ignition to start procedure of file sending.<br />
[[Image:Configuration_tacho1111.PNG|800px|center]]
==External links==
==External links==
https://teltonika.lt/product/tachograph-web/ <br />
https://teltonika.lt/product/fmb630/
https://wiki.teltonika-gps.com/view/FMB640
