0
edits
Changes
no edit summary
[[File:SIMPLE-CAN.png|right|250px]]
[[File:SIMPLE-CAN.png|right|250px]]
'''SIMPLE-CAN''' is contactless adapter used to read vehicle CAN data with [[LV-CAN200]], [[ALL-CAN300]] and FM6320/[[FMB630]].
'''SIMPLE-CAN''' is contactless adapter used to read vehicle CAN data with [[LV-CAN200]], [[ALL-CAN300]] and FM6320/[[FMB630]].
==Feature==
==Features==
*SIMPLE-CAN collects vehicle data from CAN bus without damaging the wires
*SIMPLE-CAN collects vehicle data from CAN bus without damaging the wires
*Powered from on-board power source
*Powered from on-board power source
| 0.91 mA
| 0.91 mA
|}
|}
==Installation notes==
If [[LV-CAN200]] or [[ALL-CAN300]] connection requires '''two CAN lines''' to get all data, then you need '''two SIMPLE-CAN readers'''. <br> <br>
SIMPLE-CAN works in the '''listening mode only''', so not all the data available on the CAN-BUS may be received using this solution. The '''device automatically sets CAN L/H polarity''', but the calibration has to be always executed during installation process. Connection of previously calibrated unit to another car needs new calibration because the reader '''automatically adjusts signal level and speed''' to different CAN-BUSes. The device also '''automatically adapts''' to the found '''noise level'''.
SIMPLE-CAN works in the '''listening mode only''', so not all the data available on the CAN-BUS may be received using this solution. The '''device automatically sets CAN L/H polarity''', but the calibration has to be always executed during installation process. Connection of previously calibrated unit to another car needs new calibration because the reader '''automatically adjusts signal level and speed''' to different CAN-BUSes. The device also '''automatically adapts''' to the found '''noise level'''.
<br><br>
<br><br>