3,222
edits
Changes
FMB640 DDD files configuration via Front Panel K-Line (view source)
Revision as of 09:52, 10 July 2019
, 09:52, 10 July 2019no edit summary
It allows to download DDD file data from tachograph front interface K-Line (Pin2 in front connector).
It allows to download DDD file data from tachograph front interface K-Line (Pin2 in front connector).
To configure the device simply select "Front Panel" to be DDD download source.
In order to download DDD files from Front Panel, you will also need to activate the front interface file download functionality of the tachograph. This can be done with Tachograph Update cards. <br>
In order to download DDD files from Front Panel, you will also need to activate the front interface file download functionality of the tachograph. This can be done with Tachograph Update cards. <br>
•A2C59516603 - one activation. <br>
•A2C59516603 - one activation. <br>
In order to check if the connection/activation/configuration is correct, "tachocheck" SMS command have to be sent. If connection is correct, the device will reply:
In order to check if the connection/activation/configuration is correct, "tachocheck" SMS command have to be sent. If connection is correct, the device will reply:
The other values will always be zero because there is no FMS data and the K-line is used for front download.
The other values will always be zero because there is no FMS data and the K-line is used for front download.
<b>NOTE:</b> Majority of 12V Tachographs only support download from Front Panel. To check which DDD download method is supported and which baudrate should be used, use [http://tacholookup.teltonika.lt/|Teltonika Tachograph Lookup tool]
