0
edits
Changes
Template:FMB002 First start card (view source)
Revision as of 09:14, 27 August 2019
, 09:14, 27 August 2019Created page with "centre <b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Blue-tooth connectivity}}}</b>{{{pic|Ima..."
[[Image:Qsg_rut950_teltonika.PNG|centre]]
<b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Blue-tooth connectivity}}}</b>{{{pic|[[Image:FMB002 600x600 1.png|400px|right]]}}}
__TOC__
=='''How to insert Micro-SIM card and connect battery'''==
# Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.
# Insert '''Nano-SIM card''' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
# Attach the SIM card tray back.
# Open device top cover to access battery connector. Cover is opened by unclipping it at the recessed corner
# Connect the battery as shown to device.
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
Device is ready to be mounted.
{{{insert1|[[Image:Fmb020 card 1.png|280px]]}}}{{{insert2|[[Image:Fmb020 card 2.png|280px]]}}}{{{insert3|[[Image:Fmb020 card 3.png|280px]]}}}{{{insert4|[[Image:Fmb020 card 4.png|280px]]}}}{{{insert5|[[Image:Fmb020 card 5.png|280px]]}}}{{{insert6|[[Image:Fmb020 card 6.png|280px]]}}}
{|
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
|}
<b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Blue-tooth connectivity}}}</b>{{{pic|[[Image:FMB002 600x600 1.png|400px|right]]}}}
__TOC__
=='''How to insert Micro-SIM card and connect battery'''==
# Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.
# Insert '''Nano-SIM card''' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
# Attach the SIM card tray back.
# Open device top cover to access battery connector. Cover is opened by unclipping it at the recessed corner
# Connect the battery as shown to device.
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
Device is ready to be mounted.
{{{insert1|[[Image:Fmb020 card 1.png|280px]]}}}{{{insert2|[[Image:Fmb020 card 2.png|280px]]}}}{{{insert3|[[Image:Fmb020 card 3.png|280px]]}}}{{{insert4|[[Image:Fmb020 card 4.png|280px]]}}}{{{insert5|[[Image:Fmb020 card 5.png|280px]]}}}{{{insert6|[[Image:Fmb020 card 6.png|280px]]}}}
{|
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
|}