1,255 bytes added
, 10:24, 8 October 2019
FMB122 is the device that has internal GNSS and GSM antenna.
<br />
Device should be mounted with the sticker view to the open sky (metal free). FMB122 area with sticker is shown in figure below:
<br />
[[File:FMB120_install1.jpg|center|200px]]
<br />
FMB122 is the device that have external GNSS antenna and internal GSM antenna.When placing GNSS antenna:
<br />
• Avoid easily reached places.
<br />
• Avoid placement under metal surfaces.
<br />
• GNSS antenna must be placed so its state is as horizontal as possible (if antenna is leant more than 30 degrees, it is considered incorrect mounting).
<br />
• GNSS antenna cable cannot be bent more than 80 degrees.
<br />
• GNSS antenna must be placed sticker facing down
<br />
[[File:FMB120_install3.jpg|center|200px]]
<br />
FMB1YX can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky). It is recommended to place FMB1YX behind dashboard as close to the window as possible. A good example of GNSS antenna placement is displayed in a picture below (area colored green).
<br />
SIM card should be inserted in the module while the connector is plugged off (while module has no power).
<br />
[[File:FMB120_install2.jpg|center|200px]]