0
edits
Changes
no edit summary
==Using Blue ID with Teltonika FMB1 devices==
==Using Blue ID with Teltonika FMB1 devices==
===Configuring Teltonika Device===
<p>1. Connect the device to the configurator and go to Bluetooth settings. Make sure that BT Radio is set to Enable (visible) or Enable (hidden)
<p>1. Connect the device to the configurator and go to Bluetooth settings. Make sure that BT Radio is set to Enable (visible) or Enable (hidden)
[[Image:BTRadio_Enable.png|300x200px|center|upright=0.35]]
[[Image:BTRadio_Enable.png|300x200px|center|upright=0.35]]
<p><p> An example can be seen in the figure below.
<p><p> An example can be seen in the figure below.
<br><br>3. Enable [[Codec#Codec_8_Extended| Codec 8 Extended]] Data protocol by going to System -> Data Protocol.
[[Image:BeaconList_Configured.png|center|800px]]
[[Image:BeaconList_Configured.png|center|800px]]
===Configuring Blue ID Beacon===
<p>3. In order for the Blue ID beacon to start transmitting data, it will have to be turned on. To enable your BLE sensors or BLE Beacons use the [https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile] application. Your phone or device that is used for configuring BLE Sensors or Beacons has to have NFC (configurations are written to a sensor or beacon through NFC).
<p>1. In order for the Blue ID beacon to start transmitting data, it will have to be turned on. To enable your BLE sensors or BLE Beacons use the [https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile] application. Your phone or device that is used for configuring BLE Sensors or Beacons has to have NFC (configurations are written to a sensor or beacon through NFC).
<br><br>Below you can find on how to Enable and configure ELA Coin ID or ELA Puck ID to send in the iBeacon format:
<br><br>Below you can find on how to Enable and configure ELA Coin ID or ELA Puck ID to send in the iBeacon format:
