1,580
edits
Changes
Template:Magnetic Card Functionality (view source)
Revision as of 11:28, 2 April 2020
, 11:28, 2 April 2020Created page with "== Magnetic card functionality == 300px|thumb|Figure 1 Magnetic card functionality parameters in configurator ==== Vehicle type ==== Magnetic card functionali..."
== Magnetic card functionality ==
[[File:MCF.JPG|300px|thumb|Figure 1 Magnetic card functionality parameters in configurator]]
==== Vehicle type ====
Magnetic card functionality parameter appearance is shown in ''Figure 1.'' The Other vehicle type ID
is displayed only if '''Vehicle type''' is selected as '''Other''' This field allows configuring custom vehicle types
see chapter '''Custom vehicle types'''.
<br>
==== Vehicle use type ====
On initial configuration, the parameters '''Vehicle type''' and '''Vehicle use type''' are set to '''None'''. This
allows the vehicle to be started via immobilizer scenario with any license type (if immobilizer is enabled) enabled). If
any other options are used for '''Vehicle type''' and '''Vehicle use type''', ''Table 2'' is used to lookup authorization
with regards to driver's license type.
==== Buzzer Control ====
Different buzzers can be controlled when unauthorized cards are swiped see chapter Driver state
logic for a specific or infinite amount of time:
<br>
• DOUT1 or DOUT2 are simply turned on for the amount of time configured<br>
• Integrated uses built in buzzer in tracking device<br>
• Reader uses built in buzzer in the magnetic card reader (if supports buzzer control command)<br>
== Authorization for immobilizer scenario ==
Based on parameters '''Vehicle type''', '''Vehicle use type''','''Vehicle additional information''', ''Table 2''
data that is shown below and the license type obtained from the magnetic card via reader , the functionality
decides whether or not the vehicle can be started (immobilizer scenario) The immobilizer must have priority to be set and output control configured in order for it to function.
[[File:MCF.JPG|300px|thumb|Figure 1 Magnetic card functionality parameters in configurator]]
==== Vehicle type ====
Magnetic card functionality parameter appearance is shown in ''Figure 1.'' The Other vehicle type ID
is displayed only if '''Vehicle type''' is selected as '''Other''' This field allows configuring custom vehicle types
see chapter '''Custom vehicle types'''.
<br>
==== Vehicle use type ====
On initial configuration, the parameters '''Vehicle type''' and '''Vehicle use type''' are set to '''None'''. This
allows the vehicle to be started via immobilizer scenario with any license type (if immobilizer is enabled) enabled). If
any other options are used for '''Vehicle type''' and '''Vehicle use type''', ''Table 2'' is used to lookup authorization
with regards to driver's license type.
==== Buzzer Control ====
Different buzzers can be controlled when unauthorized cards are swiped see chapter Driver state
logic for a specific or infinite amount of time:
<br>
• DOUT1 or DOUT2 are simply turned on for the amount of time configured<br>
• Integrated uses built in buzzer in tracking device<br>
• Reader uses built in buzzer in the magnetic card reader (if supports buzzer control command)<br>
== Authorization for immobilizer scenario ==
Based on parameters '''Vehicle type''', '''Vehicle use type''','''Vehicle additional information''', ''Table 2''
data that is shown below and the license type obtained from the magnetic card via reader , the functionality
decides whether or not the vehicle can be started (immobilizer scenario) The immobilizer must have priority to be set and output control configured in order for it to function.
