Changes

On initial configuration, the parameters '''Vehicle type''' and '''Vehicle use type''' are set to '''None'''. This

On initial configuration, the parameters '''Vehicle type''' and '''Vehicle use type''' are set to '''None'''. This

allows the vehicle to be started via immobilizer scenario with any license type (if immobilizer is enabled) enabled). If

allows the vehicle to be started via immobilizer scenario with any license type (if immobilizer is enabled) enabled). If

any other options are used for '''Vehicle type''' and '''Vehicle use type''', ''Table 2'' is used to lookup authorization

any other options are used for '''Vehicle type''' and '''Vehicle use type''', ''Table 1'' is used to lookup authorization

with regards to driver's license type.

with regards to driver's license type.

==Authorization for immobilizer scenario==

==Authorization for immobilizer scenario==

Based on parameters '''Vehicle type''', '''Vehicle use type''','''Vehicle additional information''', ''Table 2''

Based on parameters '''Vehicle type''', '''Vehicle use type''','''Vehicle additional information''', ''Table 1''

data that is shown below and the license type obtained from the magnetic card via reader , the functionality

data that is shown below and the license type obtained from the magnetic card via reader , the functionality

decides whether or not the vehicle can be started (immobilizer scenario) The immobilizer must have priority to be set and output control configured in order for it to function.

decides whether or not the vehicle can be started (immobilizer scenario) The immobilizer must have priority to be set and output control configured in order for it to function.

<br />

<br />

{| class="wikitable mw-collapsible"

{| class="wikitable mw-collapsible"

|+Table 2 Authorization to start vehicle depending on license and vehicle type

|+Table 1 Authorization to start vehicle depending on license and vehicle type

! colspan="2" |Vehicle type

! colspan="2" |Vehicle type

!B.1

!B.1

If the '''Vehicle type''' is configured as '''Other''', then the decision of whether the vehicle can be started or not is made by using the table located in '''Custom vehicle types''' tab.

If the '''Vehicle type''' is configured as '''Other''', then the decision of whether the vehicle can be started or not is made by using the table located in '''Custom vehicle types''' tab.