1,639
edits
Changes
How to capture CAN adapter log from FMX1YX (view source)
Revision as of 12:55, 22 December 2020
, 12:55, 22 December 2020Reverted edits by VytenisK (talk) to last revision by Airidas.S
#'''Start vehicle engine'''.
#'''Start vehicle engine'''.
#Send following '''SMS commands''' to FMX1YX device:
#Send following '''SMS commands''' to FMX1YX device:
#*If you have set SMS login and password:<code>login pass sdformat</code><code>'''Note:'''this will delete all previous DUMP without filters logs and that have not been sent yet.</code>
#*If you have set SMS login and password:<code>login pass log2sdfilterset 0;4;1</code>
#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;4;1</code> <p>If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:3</code> then you can restart the device</p>
#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code> <p>If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:4</code> then you can restart the device</p>
#*<p>If you have set SMS login and password: <code>login pass cpureset</code></p>
#*<p>If you have set SMS login and password: <code>login pass cpureset</code></p>
#*<p>If SMS login and password are not set leave two spaces before command:<code><span style="color:#f8f9fa">aa</span>cpureset</code></p><p>Filter description:</p><p>Filter 0 - default filters (No additional data)</p><p>Filter 2 - turn on AVL record creation filter</p><p>Filter 4 - turn on CAN adapter filter</p><p>Filter 1 - save installed filters to memory after restart</p>
#*<p>If SMS login and password are not set leave two spaces before command:<code><span style="color:#f8f9fa">aa</span>cpureset</code></p><p>Filter description:</p><p>Filter 0 - default filters (No additional data)</p><p>Filter 4 - turn on CAN adapter filter</p><p>Filter 1 - save installed filters to memory after restart</p>
#After the SMS response message CAN adapter log capturing has been started.
#After the SMS response message CAN adapter log capturing has been started.
#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.
#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.
