1,640
edits
Changes
How to capture OBDII data log? (view source)
Revision as of 13:21, 22 December 2020
, 13:21, 22 December 2020no edit summary
#Send following '''SMS commands''' to Teltonika tracker:
#Send following '''SMS commands''' to Teltonika tracker:
##If you have set SMS login and password:<code>login pass sdformat</code> <code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code> If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>sdformat</code>
##If you have set SMS login and password:<code>login pass sdformat</code> <code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code> If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>sdformat</code>
##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code> If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code> Filter description: Filter 0 - default filters (No additional data) Filter 2 - turn on AVL record creation filter Filter 4 - turn on CAN adapter filter Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT) Filter 1 - save installed filters to memory after restart If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:4</code> then you can restart the device
##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code> If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code> Filter description: Filter 0 - default filters (No additional data) Filter 2 - turn on AVL record creation filter Filter 4 - turn on CAN adapter filter Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT) Filter 1 - save installed filters to memory after restart If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:4</code> then you can restart the device
##If you have set SMS login and password: <code>login pass cpureset</code>
##If you have set SMS login and password: <code>login pass cpureset</code>
##If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>cpureset</code>
##If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>cpureset</code>
