Changes

#Start vehicle engine (skip if vehicle is deployed)   

#Start vehicle engine (skip if vehicle is deployed)   

#Send following '''SMS commands''' to Teltonika tracker:

#Send following '''SMS commands''' to Teltonika tracker:

##If you have set SMS login and password:<code>login pass sdformat</code>

##If you have set SMS login and password:<code>login pass sdformat</code><br><code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code><br>If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>sdformat</code>

<br><code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code>

##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code><br>If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code><br>Filter description:   Filter 0 - default filters (No additional data)<br>Filter 2 - turn on AVL record creation filter<br>Filter 4 - turn on CAN adapter filter<br>Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT)<br>Filter 1 - save installed filters to memory after restart   <br>If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:4</code> then you can restart the device<code><br>'''Note:'''If you are using bluetooth OBDII dongle use log2sdfilterset 0;2;4;7;1 instead of log2sdfilterset 0;2;4;1, then correct SMS Response will be: Enabled Trace Filters:5</code>

<br>If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>sdformat</code>

##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code>

<br>If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code>  

<br>Filter description:    

<br>Filter 0 - default filters (No additional data)    

<br>Filter 2 - turn on AVL record creation filter    

<br>Filter 4 - turn on CAN adapter filter    

<br>Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT)    

<br>Filter 1 - save installed filters to memory after restart    

<br>If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:4</code> then you can restart the device

##If you have set SMS login and password: <code>login pass cpureset</code>

##If you have set SMS login and password: <code>login pass cpureset</code>

##If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>cpureset</code>   

##If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>cpureset</code>