1,640
edits
Changes
How to capture OBDII data log? (view source)
Revision as of 13:42, 22 December 2020
, 13:42, 22 December 2020no edit summary
#Send following '''SMS commands''' to Teltonika tracker:
#Send following '''SMS commands''' to Teltonika tracker:
##If you have set SMS login and password:<code>login pass sdformat</code><br><code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code><br>If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>sdformat</code>
##If you have set SMS login and password:<code>login pass sdformat</code><br><code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code><br>If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>sdformat</code>
##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code><br>If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code><br>Filter description: Filter 0 - default filters (No additional data)<br>Filter 2 - turn on AVL record creation filter<br>Filter 4 - turn on CAN adapter filter<br>Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT)<br>Filter 1 - save installed filters to memory after restart <br><code>'''Note:'''If you are using bluetooth OBDII dongle use log2sdfilterset 0;2;4;7;1 instead of log2sdfilterset 0;2;4;1, then correct</code><br>If command <code>log2sdfilterset</code> was sent correctly:<br>SMS Response will be: <code>Enabled Trace Filters:5</code> or <code>Enabled Trace Filters:4</code> depending on the sent command. You can restart the device after correct response is received
##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code><br>If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code><br>Filter description: Filter 0 - default filters (No additional data)<br>Filter 2 - turn on AVL record creation filter<br>Filter 4 - turn on CAN adapter filter<br>Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT)<br>Filter 1 - save installed filters to memory after restart <br><code>'''Note:'''If you are using bluetooth OBDII dongle use log2sdfilterset 0;2;4;7;1 instead of log2sdfilterset 0;2;4;1</code><br>If command <code>log2sdfilterset</code> was sent correctly:<br>SMS Response will be: <code>Enabled Trace Filters:5</code> or <code>Enabled Trace Filters:4</code> depending on the sent command. You can restart the device after correct response is received
##If you have set SMS login and password: <code>login pass cpureset</code>
##If you have set SMS login and password: <code>login pass cpureset</code>
##If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>cpureset</code>
##If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>cpureset</code>
