Changes

Speed Limiting Solution (view source)

Revision as of 10:15, 26 October 2021

513 bytes removed ,  10:15, 26 October 2021
no edit summary
Line 26: Line 26:       −
To have a working solution it’s important to properly wire the devices. In the picture below it's shown how to correctly wire the device.
+
To have a working solution it’s important to properly wire the devices. In the picture below it's shown how to correctly wire the device using the electronic throttle controller
    
[[File:MSP500 schema 1.7.png|783x783px]]
 
[[File:MSP500 schema 1.7.png|783x783px]]
    
There are 2 other ways of connecting the MSP500 device which are displayed below:
 
There are 2 other ways of connecting the MSP500 device which are displayed below:
 +
 +
[[File:Fuel Pump Installation.png|none|thumb|875x875px]]
 +
[[File:Solenoid Installation.png|none|thumb|960x960px]]
    
During installation please follow recommendations in order to '''avoid damaging''' device and vehicle:
 
During installation please follow recommendations in order to '''avoid damaging''' device and vehicle:
Line 318: Line 321:  
|}
 
|}
   −
Speed limiting is activated when max speed is exceeded.
  −
  −
  −
Security State Flag Examples:
  −
*1) Locked doors <span style="background:#0b9768">00 80 00 00 30 00 00 05</span>
  −
*2) Unlocked doors <span style="background:#d4f991">00 80 00 00 00 00 00 05</span>
  −
  −
Convert HEX value to BIN value:
  −
  −
Then count 28'th BIT from the back (28'th bit value shows locked/unlocked states)
  −
*1) 100000000000000000000000001<span style="background:#0b9768">1</span>0000000000000000000000000101
  −
*2) 100000000000000000000000000<span style="background:#d4f991">0</span>0000000000000000000000000101
  −
If car is locked value is <span style="background:#0b9768">1</span> and if car is unlocked value is <span style="background:#d4f991">0</span>
     −
To test the car unlocking and locking use these GPRS commands
+
Speed limiting is activated when max speed is exceeded. Relay is activated on DOUT1 which can either disable the acceleration pedal, turn off the fuel pump or close the solenoid valve. Only one scenario can be used per MSP500 device.
−
* 1) To unlock all doors use this command: "lvcanopenalldoors"
  −
*2) To lock all doors use this command: "lvcanclosealldoors"
     −
//
   
[[Category: Usage scenarios]]
 
[[Category: Usage scenarios]]
Anonymous user
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/68205"

Navigation menu