How to Install FMB640 on DAF XF: Difference between revisions

How to Install FMB640 on DAF XF (view source)

3 bytes added , 7 December 2021

no edit summary

5,278

edits

Revision as of 11:57, 2 December 2020 (view source) Sandra.Gasyte (talk \| contribs) mNo edit summary ← Older edit		Latest revision as of 16:27, 7 December 2021 (view source) Arnas.Zeb (talk \| contribs) No edit summary
Line 21:		Line 21:
	* After installation and device configuration of FMB6 (CAN1 should be selected – FMS/TACHO), you can check if the installation is properly made. Turn on the ignition of the vehicle and send SMS command: “tachocheck”. If the response shows: “Can1:111,F2EF”, 111 -means tachograph properly connected, F2EF - or any other value which is not equal to 0000, means FMS data received also.		* After installation and device configuration of FMB6 (CAN1 should be selected – FMS/TACHO), you can check if the installation is properly made. Turn on the ignition of the vehicle and send SMS command: “tachocheck”. If the response shows: “Can1:111,F2EF”, 111 -means tachograph properly connected, F2EF - or any other value which is not equal to 0000, means FMS data received also.

	[[Category:FMB640 Manual]]		[[Category:FMB640 Manual\| 9]]