How to install FMC640 to MB Actros: Difference between revisions

How to install FMC640 to MB Actros (view source)

2 bytes added , 7 December 2021

no edit summary

5,278

edits

Revision as of 12:54, 2 September 2019 (view source) Irmantas.Tydikas (talk \| contribs) m (Protected "How to install FMC640 to MB Actros" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) ← Older edit		Revision as of 16:35, 7 December 2021 (view source) Arnas.Zeb (talk \| contribs) No edit summary Newer edit →
Line 21:		Line 21:
	* After installation and device configuration of FMC640 (CAN1 should be selected – FMS/TACHO), you can check if installation is properly made. Turn on ignition of vehicle and send SMS command: “ tachocheck”. If response shows: “Can1:111,F2EF”, 111 -means tachograph properly connected, F2EF - or any other value which is not equal to 0000, means FMS data received also.		* After installation and device configuration of FMC640 (CAN1 should be selected – FMS/TACHO), you can check if installation is properly made. Turn on ignition of vehicle and send SMS command: “ tachocheck”. If response shows: “Can1:111,F2EF”, 111 -means tachograph properly connected, F2EF - or any other value which is not equal to 0000, means FMS data received also.

	[[Category:FMC640 Manual]]		[[Category:FMC640 Manual\|1]]