How to install FMM640 to MB Actros: Difference between revisions

How to install FMM640 to MB Actros (view source)

2 bytes added , 7 December 2021

no edit summary

5,278

edits

Revision as of 08:51, 6 December 2019 (view source) Aurimas.vanagas (talk \| contribs) (Created page with "800px\|center ==Installation proccess== * Below is shown main installation location: 800px\|center\|Fuse panel cover...")		Revision as of 16:41, 7 December 2021 (view source) Arnas.Zeb (talk \| contribs) No edit summary Newer edit →
Line 21:		Line 21:
	* After installation and device configuration of FMM640 (CAN1 should be selected – FMS/TACHO), you can check if installation is properly made. Turn on ignition of vehicle and send SMS command: “ tachocheck”. If response shows: “Can1:111,F2EF”, 111 -means tachograph properly connected, F2EF - or any other value which is not equal to 0000, means FMS data received also.		* After installation and device configuration of FMM640 (CAN1 should be selected – FMS/TACHO), you can check if installation is properly made. Turn on ignition of vehicle and send SMS command: “ tachocheck”. If response shows: “Can1:111,F2EF”, 111 -means tachograph properly connected, F2EF - or any other value which is not equal to 0000, means FMS data received also.

	[[Category:FMM640 Manual]]		[[Category:FMM640 Manual\|1]]