Changes

Advanced Beacon Capturing Configuration (view source)

Revision as of 15:40, 16 December 2021

88 bytes removed ,  15:40, 16 December 2021
no edit summary
Line 1: Line 1:  
==Advanced Beacon Capturing Configuration==
 
==Advanced Beacon Capturing Configuration==
−
Prior to capturing specific Beacon data it is mandatory to have Beacons communication protocol - advertising packet structure. Without knowing packet structure - it is impossible to configure device properly to capture important data.
+
==Beacon List Settings after FW ver. 3.27.07.Rev.00==
−
===Beacon Settings ===
+
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>
−
Starting with "'''Beacon Detection'''" settings (Disabled / All / Configured):
+
===Beacon Settings===
 +
 
    
'''Beacon Detection'''<br>
 
'''Beacon Detection'''<br>
−
* '''''Disabled''''' – beacon detection is disabled
+
* '''''Disabled''''' – Functionality disabled.<br>
−
* '''''All''''' – Beacon list is disabled, device will not check by the Beacon list. None the less, device will keep looking by Advanced list too if enabled.
+
* '''''All''''' – All visible beacons are detected (Max. 100).<br>
−
* '''''Configured''''' – device will only capture beacons by given data in Beacon list and Advanced list if enabled.<br>
+
* '''''Configured''''' – Only beacons from the list are sent to server<br>
    
'''Beacon Mode'''<br>
 
'''Beacon Mode'''<br>
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/69576"

Navigation menu