0
edits
Changes
Advanced Beacon Capturing Configuration (view source)
Revision as of 15:54, 16 December 2021
, 15:54, 16 December 2021no edit summary
==Beacon List Settings after FW ver. 3.27.07.Rev.00==
==Beacon List Settings after FW ver. 3.27.07.Rev.00==
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].Prior to capturing specific Beacon data it is mandatory to have Beacons communication protocol - advertising packet structure. Without knowing packet structure - it is impossible to configure device properly to capture important data.
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>
===Beacon Settings===
===Beacon Settings===
'''Beacon Detection'''<br>
'''Beacon Detection'''
* '''''Disabled''''' – Functionality disabled.<br>
* '''''Disabled''''' – Beacon detection is disabled.
* '''''All''''' – All visible beacons are detected (Max. 100).<br>
* '''''All''''' – Beacon list is disabled, device will not check by the Beacon list. None the less, device will keep looking by Advanced list too if enabled.
* '''''Configured''''' – Only beacons from the list are sent to server<br>
* '''''Configured''''' – device will only capture beacons by given data in Beacon list and Advanced list if enabled.
'''Beacon Mode'''<br>
'''Beacon Mode'''<br>
* '''''Simple''''' – When simple mode is selected beacon parsing is done automatically (Eddystone and iBeacon protocols are supported) ('''AVL ID 385''').<br>
* '''''Simple''''' – When simple mode is selected beacon parsing is done automatically (Eddystone and iBeacon protocols are supported) ('''AVL ID 385''').
* '''''Advanced''''' – When advanced beacon mode is selected, beacon data capturing can be configured manually ('''AVL ID 548''').<br>
* '''''Advanced''''' – When advanced beacon mode is selected, beacon data capturing can be configured manually ('''AVL ID 548''').<br>
'''Beacon Record'''<br>
'''Beacon Record'''<br>
* '''''On Change''''' – On change mode - device will not create Beacon record after every scan procedure is completed unless scanned Beacon list will change.<br>
* '''''On Change''''' – On change mode - device will not create Beacon record after every scan procedure is completed unless scanned Beacon list will change.
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>
'''Beacon Record Priority''' - Beacon record saving period:
'''Beacon Record Priority''' - Beacon record saving period:
*'''''None''''' - No records will be generated <br>
*'''''None''''' - No records will be generated
*'''''Low''''' - Beacon record will be generated and sent once link with the server is established<br>
*'''''Low''''' - Beacon record will be generated and sent once link with the server is established
*'''''High''''' - Beacon record will be generated and sent immediately<br>
*'''''High''''' - Beacon record will be generated and sent immediately<br>
Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.
Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.
===Advanced Beacon Mode (Universal Beacons)===
=== '''Idea of Beacon Capturing Configuration''' ===
Functionality allows to capture advertising packet of any kind of Beacon which broadcasts its information automatically. Beacon Capturing Configuration list also can be called as the set of rules to capture and transfer Beacon data. Advanced mode main purpose is to capture additional or only specific data (''by Manufacturers ID'') according to configured Offsets and Data sizes.
[[File:BeaconMode.gif|right]]
[[File:BeaconMode.gif|right]]
In advanced mode device can detect any Beacon type, the device can be configured to capture data from Universal beacons as seen in the configured in table (The fields in the Beacons Capturing Configuration will be empty), for example this configuration is set to detect iBeacon and EddyStone Beacons, also with additional data(in this case whole packet).
In advanced mode device can detect any Beacon type, the device can be configured to capture data from Universal beacons as seen in the configured in table (The fields in the Beacons Capturing Configuration will be empty), for example this configuration is set to detect iBeacon and EddyStone Beacons, also with additional data(in this case whole packet).
