Changes

ADAS First Start (view source)

Revision as of 16:02, 26 August 2022

1,069 bytes removed ,  16:02, 26 August 2022
no edit summary
Line 1: Line 1:  
__TOC__
 
__TOC__
−
  −
== Main (front) camera unit preparation ==
  −
The main unit comes prepared for bus/large truck setup (cable routing) or vehicles with mostly vertical windshields''.'' To set up the unit for an average truck or passenger vehicle, dismantle partially as shown below:
  −
{| class="wikitable"
  −
|+
  −
! colspan="6" |Unit preparation
  −
|-
  −
|[[File:Camera1.jpg|center|frameless|181x181px]]
  −
|1.  Remove cover
  −
|[[File:Camera1.jpg|center|frameless|186x186px]]
  −
|2. Remove (2x) screws,
  −
remove plastic cover
  −
|[[File:Camera3.png|center|frameless|216x216px]]
  −
|3. Remove (2x) screws,
  −
pry plastic mounting
  −
  −
frame off Unit from corners
  −
|-
  −
|[[File:Camera4.png|center|frameless|199x199px]]
  −
|4. Reroute the main
  −
cable (and rear camera
  −
  −
cable, if adding) around unit
  −
  −
to front (glass side)
  −
|[[File:Camera5.png|center|frameless|221x221px]]
  −
|5. Press tightly into
  −
channels when routing cables.
  −
  −
Remove front camera dust sticker
  −
|[[File:Camera6.png|center|frameless|238x238px]]
  −
|6. Replace 1 cover only
  −
removed from step 3.
  −
  −
Replace 2 screws.
  −
  −
Leave the remaining
  −
  −
covers off until the last step
  −
|}
      
== Vehicle installation ==
 
== Vehicle installation ==
MindaugasK
0

edits

Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/75504"

Navigation menu