Changes

==Testing NBL-2==

==Testing NBL-2==

Power up FMB device and start logging it in Terminal application. When RFID card is not enabled, BLE Custom 1 parameter (AVL ID: 331) will show a specific value. Example:

Power up FMB device and start logging it in Terminal application. When RFID card is not enabled, BLE RFID #1 parameter (AVL ID: 451) will show a specific value. Example:

''IO ID[331] Length[   0]: NaN''

''IO ID[451]: 0x0000000000000000''

When RFID card is activated (card touched to NBL-2 and followed by two beeps) BLE Custom 1 parameter should look like this:

When RFID card is activated (card touched to NBL-2 and followed by two beeps) BLE RFID #1 parameter should look like this:

''IO ID[331] Length[   8]: 00h 19h 3Eh F2h 57h 66h 80h 00h''

''IO ID[451]: 0x0004193EF2576680''

When Private/Business mode is enabled (Button1 or Button2 is pressed):

When Private/Business mode is enabled (Button1 or Button2 is pressed):

''IO ID[331] Length[   8]: 00h 00h 00h 00h 00h 00h 00h 00h''

''IO ID[451]: 0x0000000000000000''

 

 

''IO ID[391]: 1''

==NBL-2 packet==

==NBL-2 packet==

NBL-T data is being read via broadcast packets only. Packet structure is described below:

NBL-T data is being read via broadcast packets only. Packet structure is described below: