27
edits
Changes
Speed Limiting Solution FMC130+ETC (view source)
Revision as of 15:20, 8 December 2022
, 15:20, 8 December 2022no edit summary
<span style="color:red"><b>Note: The speed will be limited within +10 km/h from the configured speed if the [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Speed_Source speed source] is set to GNSS and for more accuracy [https://teltonika-gps.com/product/lv-can200/ CAN adapters] can be implemented. </b></span>
<span style="color:red"><b>Note: Detected speed has to be greater than (configured max speed +3% of configured max speed) for Over speed start event; detected speed has to be lower than(configured max speed -3% of configured max speed) for Over speed end event. </b></span>
<span style="color:red"><b>Note: The speed will be limited within +10 km/h from the configured speed if the [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Speed_Source speed source] is set to GNSS and for more accuracy [https://teltonika-gps.com/product/lv-can200/ CAN adapters] can be implemented. </b></span>
<span style="color:red"><b>Note: Detected speed has to be greater than (configured max speed +3% of configured max speed) for Over speed start event; detected speed has to be lower than(configured max speed -3% of configured max speed) for Over speed end event. </b></span>
Speed limiting is achieved when max speed is exceeded. Relay is activated on DOUT1 which will disable the acceleration pedal, turn off the fuel pump or close the solenoid valve.
Speed limiting is achieved when max speed is exceeded. Relay is activated on DOUT1 which will disable the acceleration pedal, turn off the fuel pump or close the solenoid valve.
'''Note: The speed will be limited within +10 km/h from the configured value when the [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Speed_Source speed source] is set to GNSS. To achieve the accurate speed limiting [https://teltonika-gps.com/product/lv-can200/ CAN adapters] can be implemented.'''
'''Note: Detected speed has to be greater than (configured max speed +3% of configured max speed) for Over speed start event; detected speed has to be lower than(configured max speed -3% of configured max speed) for Over speed end event.'''
[[Category: Usage scenarios]]
[[Category: Usage scenarios]]
