6,023
edits
Changes
Flespi with Fleet Management (FM) (view source)
Revision as of 08:00, 21 April 2023
, 08:00, 21 April 2023Created page with "==Introduction== 300px|frame Many clients who own a Teltonika device ask how to create a server to send data to. To get you a quick start, we present you..."
==Introduction==
[[Image:Flespi.png|300px|frame]]
Many clients who own a Teltonika device ask how to create a server to send data to. To get you a quick start, we present you a tutorial with the most important steps that have to be taken, when setting up your device to send data to the server – flespi platform!
<br><br><br><br><br><br>
==First time with flespi==
<b>1.</b> Go to [https://flespi.io/ flespi.io]<br>
<b>2.</b> Click on <b>Login/Register</b> button<br>
<b>3.</b> Click on one of the icons to register with<br>
<i>In the example, registering is done as shown in the picture:</i>
[[Image:Flespi_register.png|1000px|frame|center]]<br>
<b>4.</b> After clicking the ‘<b>@</b>’ icon, click the <b>REGISTER</b> button<br>
[[Image:Flespi_register1.png|1000px|frame|center]]<br>
<b>5.</b> Fill the required fields in order to register<br>
[[Image:Flespi_register2.png|1000px|frame|center]]<br>
<b>NOTE:</b> When logging in the first time, a platform generates a <i>MASTER FLESPI TOKEN</i>, therefore you
will not be required to use a password, when logging into the platform next time. To login next
time, simply to press the fingerprint icon, visual example is shown below<br>
[[Image:Flespi_login.png|1000px|frame|center]]<br>
==How to add a device==
<b>1.</b> Click on <b>Telematics Hub</b> to expand the panel<br>
<b>2.</b> Click <b>Devices tab</b><br>
<b>3.</b> To add a device, click '<b>+</b>' button, which is at the bottom right corner of the screen<br>
<b>4.</b> After '<b>+</b>' clicking button, a Device tab appears in which you have to fill the fields<br>
[[Image:Device_add.png|1000px|frame|center]]<br>
<b>5.</b> Once saved, a created device in device tab appears<br>
[[Image:Example_device_tab.png|1000px|frame|center]]<br>
==How to create a channel==
<b>1.</b> Click on <b>Telematics Hub</b> to expand the panel<br>
<b>2.</b> Click <b>Channels tab</b><br>
<b>3.</b> To add a channel, click '<b>+</b>' button, which is at the bottom right corner of the screen<br>
<b>4.</b> After '<b>+</b>' clicking button, a Channel tab appears in which you have to fill the following fields<br>
[[Image:Example_Channel_add.png|1000px|frame|center]]<br>
<b>5.</b> Once the saving is done, a channel is created. In example below, a channel named TELTONIKA_TEST is created<br>
<br>
[[Image:Channel_domain-port.png|1000px|frame|center]]<br>
==How to connect a device to created channel==
In instructions [[First_time_with_flespi_platform#How_to_create_a_Channel| <i>'How to create a channel'</i>]] a channel has been created with channel <b>IP Address/Domain and Port</b> numbers. To connect to that
channel, the device must be configured. <b>IP Address/Domain and Port</b> numbers are shown in image below.<br>
<br>
[[Image:Channel_domain-port.png|1000px|frame|center]]<br>
<b>Teltonika configurator: Setting up a device for communication with the server</b>
{|style="width: 100%;"
|[[Image:GPRS_settings.png|right]]
<b>1.</b> Press <b>GPRS</b> tab<br>
* <b>''GPRS Context'' field requires you to enter your SIM providers' APN settings. Make sure to fill this in based on the SIM provider you are using with your Teltonika device.</b>
More information about ''GPRS'' panel and it's parameters for each device can be found here:
[[TST100 GPRS settings|TST100]] | [[TFT100 GPRS settings|TFT100]] | [[GH5200 GPRS settings|GH5200]] | [[TMT250 GPRS settings|TMT250]]
|}
{|style="width: 100%;"
|[[Image:Server_settings.png|right]]
<b>2.</b> In <b>GPRS</b>-><b>Server settings</b> -> <b>Domain</b> field, enter <b>flespi domain</b><br>
<b>3.</b> In <b>Port</b> field, enter <b>flespi domain port</b> number<br>
|}
<b>Note:</b> To configure how frequently the device sends data to the <i>flespi</i> platform, go to <b>Data Acquisition settings</b>
and set <b>On stop</b>, <b>Moving</b> parameters in the configurator. In the example below, the device has been
configured to:<br>
* <i>Min Period</i> – Acquire a new record every 5 seconds <br>
* <i>Min Saved Records </i> – Have minimum 5 records in one data packet that can be sent to the server<br>
* <i>Send Period</i> – Send records to the server every 30 seconds.<br>
More information about ''Data acquisition'' panel for each device can be found here:
[[TST100_Data_acquisition_settings|TST100]] | [[TFT100_Data_acquisition_settings|TFT100]] | [[GH5200_Data_acquisition_settings|GH5200]] | [[TMT250_Data_acquisition_settings|TMT250]]
<br>
[[Image:Data_acquisition_flespi.png|1000px|frame|center]]<br>
==Tracking proximity records on flespi==
Before going any further, make sure you have configured proximity settings!<br>
* <b>To find out more about proximity feature visit:</b> [[Proximity|About proximity]]
* <b>To start a Proximity Quick Start Guide visit:</b> [[Proximity functionality Quick Start Guide|Proximity functionality Quick Start Guide]]<br>
<br>
<div style="text-align: center;">[[File:Alert.png|30px]]</div>
<div style="text-align: center;"><b>To use proximity feature or track proximity records, device proximity firmware is required!</b></div>
<div style="text-align: center;"><b>We recommend to use the latest version of the firmware. Contact your sales manager to get Teltonika Drive link and download the latest version.</b></div><br>
<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
<b>2.</b> Login and select <b>Channels</b> panel<br>
<b>3.</b> Tap on a <b>channel</b><br>
<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
[[Image:Server_icons.png|1000px|frame|center]]<br>
<b>7.</b> In the search field, search for these parameters:<br>
* proximity.duration<br>
* proximity.violation.ident<br>
* custom.param.889<br>
<b>Click on the eye button to add each of the searched columns</b><br>
<b>8.</b> If everything is done correctly, at the bottom, three new recently added columns are visible<br>
[[Image:New_columns_flespi.png|1000px|frame|center]]<br>
<b>9.</b> Now unplug the devices and test proximity feature. When proximity event happens, the device sends data to the flespi platform.<br>
[[Image:Proximity_flespi_violation.png|1000px|frame|center]]<br>
<div style="text-align: center;"><b>Information about parameters:</b></div>
{| class="wikitable" style="margin: 1em auto;"
|-
| <b>Column name</b>
| <b>Description</b>
|-
| proximity.duration || Time period proximity event has happened in seconds
|-
| proximity.violation.ident || IMEI number of devices that have violated the personal space.
|-
| custom.param.889 || AVL ID – 889 Shows proximity state: <b>On-Entrace</b> event sends value – 16, <b>On-Exit</b> event sends value – 0
|-
|}
==Tracking ManDown records on flespi==
* <b>To find out about ManDown feature visit:</b> [[GH5200_Features_settings#ManDown|GH5200]] | [[TMT250_Features_settings#ManDown|TMT250]]
* <b>To learn how to configure a ManDown feature visit:</b> [[How_to_configure_ManDown_scenario|ManDown scenario]]<br>
<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
<b>2.</b> Login and select <b>Channels</b> panel<br>
<b>3.</b> Tap on a <b>channel</b><br>
<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
[[Image:Server_icons.png|1000px|frame|center]]<br>
<b>7.</b> In the search field, search for <b>mandown.alarm.status</b> parameter<br>
<b>Click on the eye button to add a column</b><br>
<b>8.</b> If everything is done correctly, at the bottom, a new recently added column is visible: <b>mandown.alarm.status</b>
[[Image:ManDown_flespi.png|1000px|frame|center]]<br>
<b>9.</b> When a ManDown event happens, the device sends a record to flespi platform</b><br>
[[Image:Mandown_flespi_true.png|1000px|frame|center]]<br>
==In door tracking using BLE advertising Beacons on flespi==
<br>
<div style="text-align: center;">[[File:Alert.png|30px]]</div>
<div style="text-align: center;"><b>Before going any further be sure that your Beacon is enabled and ready for configuration!</b></div><br>
<b>To learn how to configure in door tracking using BLE advertising Beacons visit:</b> [[How to read data from BLE Beacons]]
<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
<b>2.</b> Login and select <b>Channels</b> panel<br>
<b>3.</b> Tap on a <b>channel</b><br>
<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
[[Image:Server_icons.png|1000px|frame|center]]<br>
<b>7.</b> In the search field, search for <b>ble.beacons</b> parameter<br>
<b>Click on the eye button to add a column</b><br>
[[Image:BLE_BEACONS_FLESPI.png|1000px|frame|center]]<br>
<b>8.</b> If everything is done correctly, at the bottom, a new recently added column is visible: <b>ble.beacons</b>
[[Image:Blebeacons_column.png|1000px|frame|center]]<br>
<b>9.</b> Beacon data is sent to flespi platform, where beacon UUID can be seen and its radio signal strength
[[Image:Ble_beacon_packet.png|1000px|frame|center]]<br>
[[Category: General Technical Questions]]
[[Image:Flespi.png|300px|frame]]
Many clients who own a Teltonika device ask how to create a server to send data to. To get you a quick start, we present you a tutorial with the most important steps that have to be taken, when setting up your device to send data to the server – flespi platform!
<br><br><br><br><br><br>
==First time with flespi==
<b>1.</b> Go to [https://flespi.io/ flespi.io]<br>
<b>2.</b> Click on <b>Login/Register</b> button<br>
<b>3.</b> Click on one of the icons to register with<br>
<i>In the example, registering is done as shown in the picture:</i>
[[Image:Flespi_register.png|1000px|frame|center]]<br>
<b>4.</b> After clicking the ‘<b>@</b>’ icon, click the <b>REGISTER</b> button<br>
[[Image:Flespi_register1.png|1000px|frame|center]]<br>
<b>5.</b> Fill the required fields in order to register<br>
[[Image:Flespi_register2.png|1000px|frame|center]]<br>
<b>NOTE:</b> When logging in the first time, a platform generates a <i>MASTER FLESPI TOKEN</i>, therefore you
will not be required to use a password, when logging into the platform next time. To login next
time, simply to press the fingerprint icon, visual example is shown below<br>
[[Image:Flespi_login.png|1000px|frame|center]]<br>
==How to add a device==
<b>1.</b> Click on <b>Telematics Hub</b> to expand the panel<br>
<b>2.</b> Click <b>Devices tab</b><br>
<b>3.</b> To add a device, click '<b>+</b>' button, which is at the bottom right corner of the screen<br>
<b>4.</b> After '<b>+</b>' clicking button, a Device tab appears in which you have to fill the fields<br>
[[Image:Device_add.png|1000px|frame|center]]<br>
<b>5.</b> Once saved, a created device in device tab appears<br>
[[Image:Example_device_tab.png|1000px|frame|center]]<br>
==How to create a channel==
<b>1.</b> Click on <b>Telematics Hub</b> to expand the panel<br>
<b>2.</b> Click <b>Channels tab</b><br>
<b>3.</b> To add a channel, click '<b>+</b>' button, which is at the bottom right corner of the screen<br>
<b>4.</b> After '<b>+</b>' clicking button, a Channel tab appears in which you have to fill the following fields<br>
[[Image:Example_Channel_add.png|1000px|frame|center]]<br>
<b>5.</b> Once the saving is done, a channel is created. In example below, a channel named TELTONIKA_TEST is created<br>
<br>
[[Image:Channel_domain-port.png|1000px|frame|center]]<br>
==How to connect a device to created channel==
In instructions [[First_time_with_flespi_platform#How_to_create_a_Channel| <i>'How to create a channel'</i>]] a channel has been created with channel <b>IP Address/Domain and Port</b> numbers. To connect to that
channel, the device must be configured. <b>IP Address/Domain and Port</b> numbers are shown in image below.<br>
<br>
[[Image:Channel_domain-port.png|1000px|frame|center]]<br>
<b>Teltonika configurator: Setting up a device for communication with the server</b>
{|style="width: 100%;"
|[[Image:GPRS_settings.png|right]]
<b>1.</b> Press <b>GPRS</b> tab<br>
* <b>''GPRS Context'' field requires you to enter your SIM providers' APN settings. Make sure to fill this in based on the SIM provider you are using with your Teltonika device.</b>
More information about ''GPRS'' panel and it's parameters for each device can be found here:
[[TST100 GPRS settings|TST100]] | [[TFT100 GPRS settings|TFT100]] | [[GH5200 GPRS settings|GH5200]] | [[TMT250 GPRS settings|TMT250]]
|}
{|style="width: 100%;"
|[[Image:Server_settings.png|right]]
<b>2.</b> In <b>GPRS</b>-><b>Server settings</b> -> <b>Domain</b> field, enter <b>flespi domain</b><br>
<b>3.</b> In <b>Port</b> field, enter <b>flespi domain port</b> number<br>
|}
<b>Note:</b> To configure how frequently the device sends data to the <i>flespi</i> platform, go to <b>Data Acquisition settings</b>
and set <b>On stop</b>, <b>Moving</b> parameters in the configurator. In the example below, the device has been
configured to:<br>
* <i>Min Period</i> – Acquire a new record every 5 seconds <br>
* <i>Min Saved Records </i> – Have minimum 5 records in one data packet that can be sent to the server<br>
* <i>Send Period</i> – Send records to the server every 30 seconds.<br>
More information about ''Data acquisition'' panel for each device can be found here:
[[TST100_Data_acquisition_settings|TST100]] | [[TFT100_Data_acquisition_settings|TFT100]] | [[GH5200_Data_acquisition_settings|GH5200]] | [[TMT250_Data_acquisition_settings|TMT250]]
<br>
[[Image:Data_acquisition_flespi.png|1000px|frame|center]]<br>
==Tracking proximity records on flespi==
Before going any further, make sure you have configured proximity settings!<br>
* <b>To find out more about proximity feature visit:</b> [[Proximity|About proximity]]
* <b>To start a Proximity Quick Start Guide visit:</b> [[Proximity functionality Quick Start Guide|Proximity functionality Quick Start Guide]]<br>
<br>
<div style="text-align: center;">[[File:Alert.png|30px]]</div>
<div style="text-align: center;"><b>To use proximity feature or track proximity records, device proximity firmware is required!</b></div>
<div style="text-align: center;"><b>We recommend to use the latest version of the firmware. Contact your sales manager to get Teltonika Drive link and download the latest version.</b></div><br>
<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
<b>2.</b> Login and select <b>Channels</b> panel<br>
<b>3.</b> Tap on a <b>channel</b><br>
<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
[[Image:Server_icons.png|1000px|frame|center]]<br>
<b>7.</b> In the search field, search for these parameters:<br>
* proximity.duration<br>
* proximity.violation.ident<br>
* custom.param.889<br>
<b>Click on the eye button to add each of the searched columns</b><br>
<b>8.</b> If everything is done correctly, at the bottom, three new recently added columns are visible<br>
[[Image:New_columns_flespi.png|1000px|frame|center]]<br>
<b>9.</b> Now unplug the devices and test proximity feature. When proximity event happens, the device sends data to the flespi platform.<br>
[[Image:Proximity_flespi_violation.png|1000px|frame|center]]<br>
<div style="text-align: center;"><b>Information about parameters:</b></div>
{| class="wikitable" style="margin: 1em auto;"
|-
| <b>Column name</b>
| <b>Description</b>
|-
| proximity.duration || Time period proximity event has happened in seconds
|-
| proximity.violation.ident || IMEI number of devices that have violated the personal space.
|-
| custom.param.889 || AVL ID – 889 Shows proximity state: <b>On-Entrace</b> event sends value – 16, <b>On-Exit</b> event sends value – 0
|-
|}
==Tracking ManDown records on flespi==
* <b>To find out about ManDown feature visit:</b> [[GH5200_Features_settings#ManDown|GH5200]] | [[TMT250_Features_settings#ManDown|TMT250]]
* <b>To learn how to configure a ManDown feature visit:</b> [[How_to_configure_ManDown_scenario|ManDown scenario]]<br>
<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
<b>2.</b> Login and select <b>Channels</b> panel<br>
<b>3.</b> Tap on a <b>channel</b><br>
<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
[[Image:Server_icons.png|1000px|frame|center]]<br>
<b>7.</b> In the search field, search for <b>mandown.alarm.status</b> parameter<br>
<b>Click on the eye button to add a column</b><br>
<b>8.</b> If everything is done correctly, at the bottom, a new recently added column is visible: <b>mandown.alarm.status</b>
[[Image:ManDown_flespi.png|1000px|frame|center]]<br>
<b>9.</b> When a ManDown event happens, the device sends a record to flespi platform</b><br>
[[Image:Mandown_flespi_true.png|1000px|frame|center]]<br>
==In door tracking using BLE advertising Beacons on flespi==
<br>
<div style="text-align: center;">[[File:Alert.png|30px]]</div>
<div style="text-align: center;"><b>Before going any further be sure that your Beacon is enabled and ready for configuration!</b></div><br>
<b>To learn how to configure in door tracking using BLE advertising Beacons visit:</b> [[How to read data from BLE Beacons]]
<b>1.</b> Go to [https://flespi.io/ flespi.io] platform<br>
<b>2.</b> Login and select <b>Channels</b> panel<br>
<b>3.</b> Tap on a <b>channel</b><br>
<b>4.</b> When selected, a channel window appears. Click on <b>TOOLBOX</b></b><br>
<b>5.</b> When <b>TOOLBOX</b></b> is opened, a new screen appears, where records from the device sent to the channel can be seen<br>
<b>6.</b> Click on icon, which is at the bottom right side as shown in the picture below<br>
[[Image:Server_icons.png|1000px|frame|center]]<br>
<b>7.</b> In the search field, search for <b>ble.beacons</b> parameter<br>
<b>Click on the eye button to add a column</b><br>
[[Image:BLE_BEACONS_FLESPI.png|1000px|frame|center]]<br>
<b>8.</b> If everything is done correctly, at the bottom, a new recently added column is visible: <b>ble.beacons</b>
[[Image:Blebeacons_column.png|1000px|frame|center]]<br>
<b>9.</b> Beacon data is sent to flespi platform, where beacon UUID can be seen and its radio signal strength
[[Image:Ble_beacon_packet.png|1000px|frame|center]]<br>
[[Category: General Technical Questions]]
