0
edits
Changes
Created page with "'''HOW TO CONFIGURE OEM PARAMETERS FOR FMX001/FMB003 ''' ==OEM parameters== Are available in the OBD Devices, *for FMB003 03.27.07.Rev.562 Firmware must be installed in orde..."
'''HOW TO CONFIGURE OEM PARAMETERS FOR FMX001/FMB003 '''
==OEM parameters==
Are available in the OBD Devices,
*for FMB003 03.27.07.Rev.562 Firmware must be installed in order to receive EV OEM data
*FOR FMC001 03.27.12.Rev.143 Firmware must be installed in order to receive OEM data.
==Configuration On the device side ==
* Move to the ''system'', and enable the '''''codec 8E''''' : [[File:System.png|right]] </br></br></br>
* [[File:OBDII.png|right]] Move to OBDII :
*# On OBD feature select ''OBD''
*# On OBD VIN setting: Select '''''Auto''''', this will gather the VIN number from the vehicle automatically
Note: If Auto didn't work Select '''''Manual''''', and put the VIN of the Vehicle Manuale.
*Enable the required IO by selecting the low priority
</br>
After the device configuration, keep the device connected to the vehicle, after the FOTA configured time, the device will automatically request to download the needed file from FOTAWEB to enable the OEM parameters.
Note: The device will request 1 or 2 files from the FOTAWEB
==Configuration via GPRES/SMS Command ==
Send the following command to the device via SMS </br>
<code><username><space><password><space>setparam 40000:1;40005:1;40430:1;40440:1</code>
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
ID:
* <span style="background-color:#91b9d4;">40000</span> – OBD Feature
* <span style="background-color:#91d4b9;">40005</span> – VIN Source
* <span style="background-color:#b991d4;">40430</span> – OEM Total Mielge
* <span style="background-color:#FFFF00;">40440</span> – OEM Fuel
Value:
* <span style="background-color:#91b9d4;">1</span> – Enable
* <span style="background-color:#91d4b9;">1</span> – Auto
* <span style="background-color:#b991d4;">1</span> – Enable (low)
* <span style="background-color:#FFFF00;">1</span> – Enable (low)
</div>
'''Note''': If no username & password for SMS, two space symbols should be inserted before the command.<br/><br/>
==Verify The Status On FOTA ==
* Open your FOTA account,
* Search about the device IMEI
* Under ''Details'', ''OBD'' section, you should see the ''VIN number'' of your vehicle:
[[File:Vin num.png|Defualt]]
*Under ''Tasks'', you can verify if the file is delivered to the device or not
:::: [[File:Obd config file fota.png|Defualt]]
If the file download is successful, kindly check your server data to confirm.
==Server Side==
The AVL ID for OEM parameters are:
*'''389''' OBD OEM Total Mileage
*'''390''' OBD OEM Fuel Level
[[File:Server data.png]]
==Troubleshooting==
Before testing, the car's ignition should be On
If you were not able to get OEM parameters using this method, you may have to check the following:
* Device Firmware
* check the device power and OBD cables
* try to drive the vehicle for some time
If the previous steps were not beneficial, then the vehicle is currently not supporting the OEM parameters and needs to perform reverse engineering.
==OEM parameters==
Are available in the OBD Devices,
*for FMB003 03.27.07.Rev.562 Firmware must be installed in order to receive EV OEM data
*FOR FMC001 03.27.12.Rev.143 Firmware must be installed in order to receive OEM data.
==Configuration On the device side ==
* Move to the ''system'', and enable the '''''codec 8E''''' : [[File:System.png|right]] </br></br></br>
* [[File:OBDII.png|right]] Move to OBDII :
*# On OBD feature select ''OBD''
*# On OBD VIN setting: Select '''''Auto''''', this will gather the VIN number from the vehicle automatically
Note: If Auto didn't work Select '''''Manual''''', and put the VIN of the Vehicle Manuale.
*Enable the required IO by selecting the low priority
</br>
After the device configuration, keep the device connected to the vehicle, after the FOTA configured time, the device will automatically request to download the needed file from FOTAWEB to enable the OEM parameters.
Note: The device will request 1 or 2 files from the FOTAWEB
==Configuration via GPRES/SMS Command ==
Send the following command to the device via SMS </br>
<code><username><space><password><space>setparam 40000:1;40005:1;40430:1;40440:1</code>
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
ID:
* <span style="background-color:#91b9d4;">40000</span> – OBD Feature
* <span style="background-color:#91d4b9;">40005</span> – VIN Source
* <span style="background-color:#b991d4;">40430</span> – OEM Total Mielge
* <span style="background-color:#FFFF00;">40440</span> – OEM Fuel
Value:
* <span style="background-color:#91b9d4;">1</span> – Enable
* <span style="background-color:#91d4b9;">1</span> – Auto
* <span style="background-color:#b991d4;">1</span> – Enable (low)
* <span style="background-color:#FFFF00;">1</span> – Enable (low)
</div>
'''Note''': If no username & password for SMS, two space symbols should be inserted before the command.<br/><br/>
==Verify The Status On FOTA ==
* Open your FOTA account,
* Search about the device IMEI
* Under ''Details'', ''OBD'' section, you should see the ''VIN number'' of your vehicle:
[[File:Vin num.png|Defualt]]
*Under ''Tasks'', you can verify if the file is delivered to the device or not
:::: [[File:Obd config file fota.png|Defualt]]
If the file download is successful, kindly check your server data to confirm.
==Server Side==
The AVL ID for OEM parameters are:
*'''389''' OBD OEM Total Mileage
*'''390''' OBD OEM Fuel Level
[[File:Server data.png]]
==Troubleshooting==
Before testing, the car's ignition should be On
If you were not able to get OEM parameters using this method, you may have to check the following:
* Device Firmware
* check the device power and OBD cables
* try to drive the vehicle for some time
If the previous steps were not beneficial, then the vehicle is currently not supporting the OEM parameters and needs to perform reverse engineering.
