527
edits
Changes
How to capture CAN adapter log from FMX1YX (view source)
Revision as of 09:05, 13 October 2023
, 09:05, 13 October 2023no edit summary
# If FW version is <b>03.27.10</b> or higher <code>cpureset</code> command is not necessary to enable the filters. On lower versions <code>cpureset</code> is mandatory.
# If FW version is <b>03.27.10</b> or higher <code>cpureset</code> command is not necessary to enable the filters. On lower versions <code>cpureset</code> is mandatory.
#*<p>If you have set SMS login and password: <code>login pass cpureset</code></p>
#*<p>If you have set SMS login and password: <code>login pass cpureset</code></p>
#*<p>If SMS login and password are not set leave two spaces before command:<code><span style="color:#f8f9fa">aa</span>cpureset</code></p><p>Filter description:</p><p>Filter 0 - default filters (No additional data)</p><p>Filter 4 - turn on CAN adapter filter</p><p>Filter 1 - save installed filters to memory after restart</p>
#*<p>If SMS login and password are not set leave two spaces before command:<code><span style="color:#f8f9fa">aa</span>cpureset</code></p>
#After the SMS response message CAN adapter log capturing has been started.
#After the SMS response message CAN adapter log capturing has been started.
#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.
#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.
