Changes

Minor grammar changes. Removed section for configuration loading from file.
Line 7: Line 7:  
The password must fulfil several requirements:
 
The password must fulfil several requirements:
   −
1.A password must contain between 5 to 10 characters;
+
# A password must contain between 5 to 10 characters;
 
+
# Symbols are not allowed (for example: "." "/" "@" "@" "!");
2.Symbols are not allowed (for example: "." "/" "@" "@" "!");
+
# Passwords must match;
 
  −
3.Passwords must match;
      
After each of the conditions is fulfilled, the corresponding field will be marked with a green tick. Press button "Set" to set password for the configuration.
 
After each of the conditions is fulfilled, the corresponding field will be marked with a green tick. Press button "Set" to set password for the configuration.
Line 31: Line 29:  
Recovery password parameters are the same as [[Configuration password#How to set configuration password with TCT|configuration password]].  
 
Recovery password parameters are the same as [[Configuration password#How to set configuration password with TCT|configuration password]].  
   −
After installing the Recovery password, don't forget to save it to your device.
+
After setting the Recovery password, don't forget to save it to your device.
   −
The Recovery password can also be changed or disabled at will.
+
The Recovery password can also be changed or disabled whenever you want following "Change" or "Disable" steps in TCT.
      Line 41: Line 39:  
After clicking on the "Configure" button, a window will appear in which it is necessary to enter the configuration password set for configuration and press the "Enter" button.
 
After clicking on the "Configure" button, a window will appear in which it is necessary to enter the configuration password set for configuration and press the "Enter" button.
   −
If an incorrect password is entered, the TCT will inform you with the text "Wrong password". It will also show the number of remaining attempts. The total number of attempts is 5. After they are exhausted, if no recovery password has been set, the device will be locked.
+
If an incorrect password is entered, the TCT will inform you with the text "Wrong password". It will also show the number of remaining attempts. The total number of attempts is 5. After attempts are exhausted and no recovery password has been set, the device will be locked.
    
If recovery password is set, the device will ask to enter it. The user will have 5 attempts to do so. If the recovery password is entered incorrectly 5 times, the device will be locked.
 
If recovery password is set, the device will ask to enter it. The user will have 5 attempts to do so. If the recovery password is entered incorrectly 5 times, the device will be locked.
    
== Disable password ==
 
== Disable password ==
To disable the password, open the "System" tab, then "Configuration password" and click the "Disable password" button. Enter the current password and click the "Disable" button. If an incorrect password is entered, the TCT will inform you about this with a corresponding text. If you save changes to the device, the TCT will additionally inform you that the password has been deactivated.
+
To disable the password, open the "System" tab, then "Configuration password" and click the "Disable" button. Enter the current password and click the "Disable" button. If an incorrect password is entered, the TCT will inform you about this with a corresponding text. If you save changes to the device, the TCT will additionally inform you that the password has been deactivated.
    
'''NOTE: The Primary password cannot be disabled when the Recovery password is enabled.'''
 
'''NOTE: The Primary password cannot be disabled when the Recovery password is enabled.'''
Line 52: Line 50:  
== How to unlock device if you forgot your password ==
 
== How to unlock device if you forgot your password ==
 
[[File:Recovery password required.png|left|thumb|Recovery password required]]
 
[[File:Recovery password required.png|left|thumb|Recovery password required]]
If you have forgotten your device password, you must exhaust 5 password attempts, after which, if recovery password is set, TCT will offer to enter recovery password (other wise device will be blocked immediately).
+
If you have forgotten your device password, you must exhaust 5 password attempts, after which, if recovery password is set, TCT will suggest to enter recovery password (other wise device will be blocked immediately). The user also has 5 attempts to enter the recovery password.
   −
After entering the recovery password, TCT will prompt the user to set a new primary password. The user also has 5 attempts to enter the recovery password.
+
After entering the recovery password, TCT will prompt the user to set a new primary password.
    
If the user enters recovery password incorrectly more than 5 times, the device will be locked, the user will see a corresponding message and unlock code.
 
If the user enters recovery password incorrectly more than 5 times, the device will be locked, the user will see a corresponding message and unlock code.
Line 61: Line 59:       −
  −
== Upload configuration file with password set to the device without password ==
  −
[[File:Password save to the device.png|thumb]]
  −
Once the configuration with password has been downloaded to the device, the following options will be available on the "System" tab of the "Configuration password" field:
  −
  −
1. "Change password" - to change the current configuration password;
  −
  −
2. "Disable password" - to remove the password from the configuration.
  −
  −
If the configuration with password is saved on the device, the user will see the following message:
  −
  −
After that, the user will be required to enter the password each time user tries to download the configuration from the device.
   
[[Category:TCT]]
 
[[Category:TCT]]

Navigation menu