Changes

#Start vehicle engine (skip if vehicle is deployed)   

#Start vehicle engine (skip if vehicle is deployed)   

#Send following '''SMS commands''' to Teltonika tracker:

#Send following '''SMS commands''' to Teltonika tracker:

##If you have set SMS login and password:<code>login pass sdformat</code>   <code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code> If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>sdformat</code>

##If you have set SMS login and password:<code>login pass sdformat</code>

##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code>  If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code>    Filter description:    Filter 0 - default filters (No additional data)      Filter 2 - turn on AVL record creation filter      Filter 4 - turn on CAN adapter filter    Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT)      Filter 1 - save installed filters to memory after restart      If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:4</code> then you can restart the device

<br><code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code>

<br>If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>sdformat</code>

##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code>   

<br>If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code>     

<br>Filter description:     

<br>Filter 0 - default filters (No additional data)       

<br>Filter 2 - turn on AVL record creation filter       

<br>Filter 4 - turn on CAN adapter filter     

<br>Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT)       

<br>Filter 1 - save installed filters to memory after restart       

<br>If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:4</code> then you can restart the device

##If you have set SMS login and password: <code>login pass cpureset</code>

##If you have set SMS login and password: <code>login pass cpureset</code>

##If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>cpureset</code>   

##If SMS login and password are not set leave two spaces before command:  <code><span style="color:#f8f9fa">aa</span>cpureset</code>