Difference between revisions of "FMU126 SMS/Call settings"
m (Protected "FMU126 SMS/Call settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(Created page with "{{Template:FMU SMS/Call settings|model=FMU126|text_din=''Outgoing Call Trigger'' parameter determines which event will trigger a call. FMU126 supports four call trigger settin...") |
(No difference)
| |
Revision as of 15:44, 12 March 2020
Main Page > EOL Products > FMU126 > FMU126 Configuration > FMU126 SMS/Call settingsSMS Data Sending
These settings allow sending AVL data using binary SMS. AVL data will be sent by SMS only when there is no GPRS connection. This setting does not affect replies to SMS request messages – answers are always sent back to the sender's telephone number.
SMS commands
Essential fields in SMS/Call settings are Login and Password. The login and password are used with every SMS sent to FMU126. If login and password are not set, in every SMS sent to FMU126 device two spaces before command have to be used (<space><space><command>).
Command structure with set login and password:
<login><space><password><space><command>, for example: "asd 123 getgps"
Phone numbers have to be written in international standard, using "+" is optional but not necessary (in both cases number will be recognized, but when number is without "+" symbol, IDD Prefix will not be generated, which depends on location of the phone). If no numbers are entered, configuration and sending commands over SMS are allowed from all GSM numbers.
