Difference between revisions of "FMP100 User Interface"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "__TOC__ '''Indication''' is configurable in '''User Interface''' tab of configurator or via '''SMS/GPRS parameter ID'''. Each 100 ms device checks if any indication is enabl...")
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
__TOC__
 
__TOC__
  
−
==User Interface==
 
  
−
In user interface section, you can customize by different needs what kind of indication for the driver should be shown.<br/>
+
'''Indication''' is configurable in '''User Interface''' tab of configurator or via '''SMS/GPRS parameter ID'''. Each 100 ms device checks if any indication is enabled in response to triggered scenarios. If two scenarios need to indicate on the same indication source ('''LED''' or '''Vibration''') then the active indicating scenario needs to be finished first (with exception of ''Alarm'' and ''Device Off'' scenarios, which can override the control of indication sources). '''Period''' setting is indicative of ''Periodic'' scenarios and if ''Period'' is set to '''0''' the indication will take place '''immediately'''. When indication is periodic and ''On'' parameter value is set to 0, the indication source will stay on until the scenario is finished. Triggered scenarios will turn on '''LED''' and/or '''Vibration''' for a configured '''On''' duration and then keep them off for a configured '''Off''' period of time. In case the configured ''Repeat'' value is higher than 0 the device continues a periodic on/off cycle. '''Enable In Sleep''' parameter will let the indication work while device is sleeping.
−
For available event indications, the possible configurable options are available to choose:<br/>
 
−
{| class="nd-othertables_2" style="width: 950px"
 
−
|+
 
−
! style="width: 20%; color: white;" |
 
−
! style="width: 80%; color: white;" |
 
−
|-
 
−
! style="text-align: left; vertical-align: top;" |Column
 
−
! style="text-align: left; vertical-align: top;" |Description
 
−
|-
 
−
| style="text-align: left; vertical-align: top;" |LED
 
−
| style="text-align: left; vertical-align: top;" |Possibility to choose indication color between 3 different colors: Red, Green, Blue or none LED indication at all.
 
−
|-
 
−
| style="text-align: left; vertical-align: top;" |Additional Indication
 
−
| style="text-align: left; vertical-align: top;" |Built in buzzer will be activated with the same configured time periods as LED indication.
 
−
|-
 
−
| style="text-align: left; vertical-align: top;" |Enable In Sleep
 
−
| style="text-align: left; vertical-align: top;" |'''Disable''' - When device in sleep mode, indication will not be showed. '''Enable''' - Indication will work while device in sleep mode.
 
−
|-
 
−
| style="text-align: left; vertical-align: top;" |Period (ms)
 
−
| style="text-align: left; vertical-align: top;" |'''Disable''' - Indication will be showed only when event occurs. '''Enable''' - indication will be showed by set period time.
 
−
|-
 
−
| style="text-align: left; vertical-align: top;" |Period (ms)
 
−
| style="text-align: left; vertical-align: top;" |Set in miliseconds after how long the indication should be showed periodically.
 
−
|-
 
−
| style="text-align: left; vertical-align: top;" |On (ms)
 
−
| style="text-align: left; vertical-align: top;" |Set in miliseconds how long the LED or buzzer will be turned on.
 
−
|-
 
−
| style="text-align: left; vertical-align: top;" |Off (ms)
 
−
| style="text-align: left; vertical-align: top;" |Set in miliseconds how long the LED or buzzer will be turned off, while doing event indication.
 
−
|-
 
−
| style="text-align: left; vertical-align: top;" |Repeat
 
−
| style="text-align: left; vertical-align: top;" |Set how many additionally times the event indication should be repeated.
 
−
|-
 
−
|}
 
  
 
==GSM Indication==
 
==GSM Indication==
−
There are 3 different available indications related to GSM work:
+
[[Image:TMT250 GSM Indication.PNG]]
−
{| class="nd-othertables_2" style="width: 950px"
+
 
 +
{| class="wikitable"
 
|+
 
|+
−
! style="width: 20%; color: white;" |
+
! style="width: 190px; background: black; color: white;" | Name
−
! style="width: 80%; color: white;" |
+
! style="width: 600px; background: black; color: white;" | Meaning
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" |Indication
+
! style="text-align: left; vertical-align: top;" | GSM Error
−
! style="text-align: left; vertical-align: top;" |Description
+
| style="text-align: left; vertical-align: top;" | SIM is not inserted, failed to connect to GSM operator or GSM signal is being jammed
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |GSM Error
+
! style="text-align: left; vertical-align: top;" | GSM Signal Established
−
| style="text-align: left; vertical-align: top;" |When there will be error with GSM signal (no signal) indication will be showed.
+
| style="text-align: left; vertical-align: top;" | Device successfully registered to GSM network
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |GSM Signal Established
+
! style="text-align: left; vertical-align: top;" | SMS Send/Receive
−
| style="text-align: left; vertical-align: top;" |Event will be showed when device connects to GSM network.
+
| style="text-align: left; vertical-align: top;" | SMS is received or sent
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |Outgoing call
+
! style="text-align: left; vertical-align: top;" | Incoming Call
−
| style="text-align: left; vertical-align: top;" |Outgoing call in progress.
+
| style="text-align: left; vertical-align: top;" | Device notices incoming call
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Remote Connection
 +
| style="text-align: left; vertical-align: top;" | Device establishes connection with the server
 
|-
 
|-
 
|}
 
|}
  
−
[[Image:GSM Indication.png]]
+
==GNSS Indication==
−
 
+
[[Image:TMT250 GNSS Indication.PNG]]
−
Note: Periodic part can't be configured and preset needs to be used.
 
  
−
==GNSS Indication==
+
{| class="wikitable"
−
There are 2 different available indication related to GNSS work:
 
−
{| class="nd-othertables_2" style="width: 950px"
 
 
|+
 
|+
−
! style="width: 20%; color: white;" |
+
! style="width: 190px; background: black; color: white;" | Name
−
! style="width: 80%; color: white;" |
+
! style="width: 600px; background: black; color: white;" | Meaning
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" |Indication
+
! style="text-align: left; vertical-align: top;" | No GPS Fix
−
! style="text-align: left; vertical-align: top;" |Description
+
| style="text-align: left; vertical-align: top;" | Device searches for valid GPS fix
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |No GPS Fix
+
! style="text-align: left; vertical-align: top;" | GPS Fix
−
| style="text-align: left; vertical-align: top;" |When the GPS Fix is not available, configured indication will be showed.
+
| style="text-align: left; vertical-align: top;" | Device has valid GPS fix
−
|-
 
−
| style="text-align: left; vertical-align: top;" |GPS Fix
 
−
| style="text-align: left; vertical-align: top;" |When GPS Fix is available, configured indication will be showed.
 
 
|-
 
|-
 
|}
 
|}
  
−
[[Image:GNSS Indication.png]]
+
==Event Indication==
 +
[[Image:TMT250 Event Indication.PNG]]
  
−
Note: Periodic part can't be configured and preset needs to be used.
+
{| class="wikitable"
−
 
 
−
==Event Indication==
 
−
There are 5 different available indication related to events:
 
−
{| class="nd-othertables_2" style="width: 950px"
 
 
|+
 
|+
−
! style="width: 20%; color: white;" |
+
! style="width: 190px; background: black; color: white;" | Name
−
! style="width: 80%; color: white;" |
+
! style="width: 650px; background: black; color: white;" | Meaning
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" |Indication
+
! style="text-align: left; vertical-align: top;" | Event
−
! style="text-align: left; vertical-align: top;" |Description
+
| style="text-align: left; vertical-align: top;" | Eventual record is saved
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |Sleep mode
+
! style="text-align: left; vertical-align: top;" | Panic Event
−
| style="text-align: left; vertical-align: top;" |Indicates if device is working in sleep mode
+
| style="text-align: left; vertical-align: top;" | Panic record is saved
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |Key pressed
+
! style="text-align: left; vertical-align: top;" | Device Off
−
| style="text-align: left; vertical-align: top;" |Indicates if button was pressed
+
| style="text-align: left; vertical-align: top;" | Device is turning off
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |Private Trip
+
! style="text-align: left; vertical-align: top;" | Device On
−
| style="text-align: left; vertical-align: top;" |Indication will be on when Private trip is active
+
| style="text-align: left; vertical-align: top;" | Device is turning on
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |Business Trip
+
! style="text-align: left; vertical-align: top;" | Pre Alarm
−
| style="text-align: left; vertical-align: top;" |Indication will be on when Business trip is active
+
| style="text-align: left; vertical-align: top;" | Indication when Man-down or No Movement event functionality starts counting timeout till event
 
|-
 
|-
−
| style="text-align: left; vertical-align: top;" |Alarm
+
! style="text-align: left; vertical-align: top;" | I Am Alive
−
| style="text-align: left; vertical-align: top;" |At Alarm event, indication will be turned on
+
| style="text-align: left; vertical-align: top;" | Periodical indication that device is on
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Sleep Mode
 +
| style="text-align: left; vertical-align: top;" | Device is in sleep mode
 
|-
 
|-
 
|}
 
|}
  
−
[[Image:Event indication.png]]
 
−
 
−
Note: Some parameter can't be configured and presets needs to be used.
 
  
−
[[Category:FMP100 Configuration]]
+
'''Note!''' three LED colors are available - ''Green'', ''Red'' and ''Blue''. Indications are fully customizable depending on the user needs.
 +
<!--[[Category:FMP100 Configuration]]-->

Revision as of 12:26, 4 June 2020

Main Page > Fast & Easy Trackers > FMP100 > FMP100 Manual > FMP100 Configuration > FMP100 User Interface


Indication is configurable in User Interface tab of configurator or via SMS/GPRS parameter ID. Each 100 ms device checks if any indication is enabled in response to triggered scenarios. If two scenarios need to indicate on the same indication source (LED or Vibration) then the active indicating scenario needs to be finished first (with exception of Alarm and Device Off scenarios, which can override the control of indication sources). Period setting is indicative of Periodic scenarios and if Period is set to 0 the indication will take place immediately. When indication is periodic and On parameter value is set to 0, the indication source will stay on until the scenario is finished. Triggered scenarios will turn on LED and/or Vibration for a configured On duration and then keep them off for a configured Off period of time. In case the configured Repeat value is higher than 0 the device continues a periodic on/off cycle. Enable In Sleep parameter will let the indication work while device is sleeping.

GSM Indication

TMT250 GSM Indication.PNG

Name Meaning
GSM Error SIM is not inserted, failed to connect to GSM operator or GSM signal is being jammed
GSM Signal Established Device successfully registered to GSM network
SMS Send/Receive SMS is received or sent
Incoming Call Device notices incoming call
Remote Connection Device establishes connection with the server

GNSS Indication

TMT250 GNSS Indication.PNG

Name Meaning
No GPS Fix Device searches for valid GPS fix
GPS Fix Device has valid GPS fix

Event Indication

TMT250 Event Indication.PNG

Name Meaning
Event Eventual record is saved
Panic Event Panic record is saved
Device Off Device is turning off
Device On Device is turning on
Pre Alarm Indication when Man-down or No Movement event functionality starts counting timeout till event
I Am Alive Periodical indication that device is on
Sleep Mode Device is in sleep mode


Note! three LED colors are available - Green, Red and Blue. Indications are fully customizable depending on the user needs.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FMP100_User_Interface&oldid=58386"